TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

ScmNoNmConn

Table 1: Alarm Details

Parameter	Description
Code	scmNoNmConn
Description/Cause	No Network Management Connectivity on System Controller Module (SCM): In a dual-CMM system, neither SCM can connect to the management IP network. In a single-CMM system, the SCM cannot connect to the management IP network.
Entities Affected	Management modules (see respective table below).
Default Severity	Critical
Service Affecting	Yes (true).
Alarm Clearing	See Clearing an scmNoNmConn alarm.
Related Fault Hierarchy	–

Table 2: Management Modules

Entity Name		Fault Indicator
Entity Name	Module	Indicator	Status
cmm:<chassis>/<slot>	CMM	See BTI7800 Series Module and BIC LED Behavior.

Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

Ensure that the connections between the management interface and the gateway on the active and standby CMMs is intact.
Check for alarms on the CMM.
- If the alarm clears, you have completed this procedure.
- If the alarm does not clear, contact your next level of support.