Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    EqptMism

    Table 1: Alarm Details

    Parameter

    Description

    Code

    eqptMism

    Description/Cause

    Equipment Mismatch: The installed equipment does not match the equipment provisioned for the slot or subslot.

    Entities Affected

    • Equipment (see respective table below).
    • Traffic modules (see respective table below).
    • Pluggable transceivers (see respective table below).

    Default Severity

    Critical

    Service Affecting

    Yes (true).

    Alarm Clearing

    See Clearing an EqptMism alarm.

    Related Fault Hierarchy

    See Equipment fault hierarchy.

    Table 2: Equipment

    Entity Name

     

    Fault Indicator

    Equipment

    Indicator

    Status

    fan:<chassis>/<slot>

    Cooling module

    See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide.

    esl:<chassis>/<slot>

    ESL

    pem:<chassis>/<slot>

    PEM

    Table 3: Traffic Modules

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    ufm:<chassis>/<slot>

    UFM

    See BTI7800 Series Module and BIC LED Behavior.

    bic:<chassis>/<slot>/<subslot>

    BIC

    roadm:<chassis>/<slot>

    ROADM2

    ila:<chassis>/<slot>

    ILA

    amp:<chassis>/<slot>

    AMP1

    wps:<chassis>/<slot>

    WPS4

    Table 4: Pluggable Transceivers

    Entity Name

     

    Fault Indicator

    Transceiver

    Indicator

    Status

    <transceiver-type>:<chassis>/<slot>/<subslot>/<port>

    where transceiver-type corresponds to the type of transceiver installed in the port; for example, cfp, qsfp, qsfp28, or sfpPlus.

    CFP, QSFP+, QSFP28, SFP+

    Fail LED, transceiver port

    On

    Clearing an EqptMism Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    Note: Refer to the BTI7800 Series Hardware Overview and Installation Guide before replacing equipment.

    1. Retrieve equipment-provisioning information:
      show equipment
    2. Do one of the following:
      • Modify the provisioned settings so that they match those of the installed equipment (equipment, traffic module, or pluggable transceiver). For information, see the BTI7800 Software Configuration Guide.
      • Replace the equipment with equipment that matches the provisioned settings.
    3. Check for alarms on the equipment.
      • If the alarm has cleared, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-10-24