Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Auto-Provisioning of BTI7800 Equipment

    When a hardware module is inserted into an unprovisioned slot, the BTI7800 detects the insertion, and discovers and auto-provisions the module (if auto-provisioning is enabled). Auto-provisioning refers to the BTI7800 automatically adding discovered equipment, including their locations and PECs, to the equipment branch of the component tree. In some cases, it might refer to automatic detection and provisioning of other hardware components. See the BTI7800 Command Line Reference Guide for details.

    If the slot that the module is inserted into has been pre-provisioned, then the module is not auto-provisioned. Instead, the inserted module is validated against the pre-provisioning, and if any differences are detected, the BTI7800 raises an equipment mismatch alarm (eqptMism).

    Auto-provisioning can be enabled or disabled. See Configuring Auto-Provisioning for details on how to change the auto-provisioning setting.

    To see the list of hardware modules that are in the equipment branch of the component tree, use the show equipment command. For example (truncated for clarity):

    bti7800# show equipment
    Chassis          PEC          Admin State  Oper State   
    ---------------  -----------  -----------  ----------   
    chassis:1        BT8A78CH14   enabled      up  
    
    Module      PEC             Admin State  Oper State      
    ----------  --------------  -----------  --------------  
    cap:1/1     BT8A78CAP1      enabled      up 
    cmm:1/A     BT8A78CMM1      enabled      up 
    fan:1/1     BT8A78FAN3      enabled      up 
    fan:1/2     BT8A78FAN3      enabled      up 
    fan:1/3     BT8A78FAN3      enabled      up 
    fan:1/4     BT8A78FAN3      enabled      up 
    pem:1/1     BT8A78ACM1      enabled      up 
    pem:1/3     BT8A78ACM1      enabled      up 
    ufm:1/2     BT8A78UFM3      enabled      notPresent 
    ufm:1/5     BT8A78UFM3      enabled      up 
    ufm:1/7     BT8A78UFM4      enabled      notPresent 
    ufm:1/8     BT8A78UFM4      enabled      up 
    ufm:1/10    BT8A78UFM4      enabled      up  
    
    BIC            PEC           Admin State  Oper State    
    -------------  ------------  -----------  -----------   
    bic:1/2/1      BT8A78CFP1G   enabled      notPresent 
    bic:1/5/1      BT8A78CFP1G   enabled      notPresent 
    bic:1/5/2      BT8A78CFP1G   enabled      down 
    bic:1/7/2      BT8A78CFP1G   enabled      notPresent 
    bic:1/8/2      BT8A78SFP12G  enabled      up 
    bic:1/10/2     BT8A78SFP12G  enabled      up  
    
    Transceiver          PEC           Admin State  Oper State   Optical Format  
    -------------------  ------------  -----------  -----------  -------------- 
    cfp:1/5/1/1                        enabled      notPresent   fixedX10 
    cfp:1/5/2/1                        enabled      notPresent   tunableX1 
    msa:1/7/1/1                        enabled      notPresent   tunableX1 
    cfp:1/7/2/1                        enabled      notPresent   tunableX1 
    msa:1/8/1/1                        enabled      up           tunableX1 
    sfpPlus:1/8/2/1                    enabled      up           fixedX1 
    sfpPlus:1/8/2/4                    enabled      up           fixedX1 
    sfpPlus:1/8/2/5                    enabled      up           fixedX1 
    sfpPlus:1/8/2/6                    enabled      up           fixedX1 
    sfpPlus:1/8/2/8      BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/8/2/9      BP3AD6SS      enabled      up           fixedX1 
    msa:1/10/1/1                       enabled      up           tunableX1 
    sfpPlus:1/10/2/1                   enabled      up           fixedX1 
    sfpPlus:1/10/2/2                   enabled      up           fixedX1 
    sfpPlus:1/10/2/3                   enabled      up           fixedX1 
    sfpPlus:1/10/2/4     BP3AM6MS      enabled      up           fixedX1 
    sfpPlus:1/10/2/5                   enabled      up           fixedX1 
    sfpPlus:1/10/2/6                   enabled      up           fixedX1 
    sfpPlus:1/10/2/7     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/8     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/9     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/10    BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/11    BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/12    BP3AD6SS      enabled      up           fixedX1 

    Modified: 2017-10-24