Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    The "no" Form of a Command

    The "no" form of a command can take the following meanings depending on the context:

    • Sets the parameter back to its default value. For example, to set the parameter, signaling-mode, back to its default value:
      bti7800(config-interface-10ge:1/3/1/1)# signaling-mode ?
      Possible completions:   [legacy]  legacy  standard 
      bti7800(config-interface-10ge:1/3/1/1)# no signaling-mode
      bti7800(config-interface-10ge:1/3/1/1)# signaling-mode ?
      Possible completions:   [standard]  legacy  standard 
    • Negates a command. For example, to enable the airfilterAbsence alarm:
      bti7800(config)# no conditions settings airfilterAbsense disable
    • Deletes a provisioned entity. For example, to delete an interface:
      bti7800(config)# no interface 10ge:1/3/1/2

    Note that the "no" form of the same command might take on different meanings depending on the parameters you use in the command.

    • This sets the parameter back to its default value:
      bti7800(config)# no system auto-warm-boot
    • This enables the option:
      bti7800(config)# no system auto-warm-boot disabled

    Modified: 2017-10-24