Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Auto-Provisioning

    Use this procedure to configure auto-provisioning.

    If auto-provisioning is enabled, the system automatically discovers and provisions newly inserted equipment. For more information, see Auto-Provisioning of BTI7800 Equipment.

    1. Enter configuration mode.

      For example:

      bti7800# config
      bti7800(config)# 
    2. Specify whether auto-provisioning is enabled or disabled.

      If auto-provisioning is enabled, the system automatically provisions newly inserted equipment for you. If auto-provisioning is disabled, you must manually provision newly inserted equipment.

      For example, to enable auto-provisioning:

      bti7800(config-system)# auto-prov true
      bti7800(config-system)# 
    3. Commit your changes.
      bti7800(config-system)# commit
      bti7800(config-system)# 

    Modified: 2017-07-06