Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Setting the Autowizard
Use this procedure to override the configured autowizard setting for the system. If you enable autowizard, the CLI prompts you to enter mandatory parameters when configuring a component. This procedure is executed in operational mode.
When you reboot the system, the autowizard setting changes back to the configured setting. See Configuring user session parameters.
 | Note: If you intend to use the running-config output as input to the CLI, you should disable autowizard. |
- Configure the autowizard setting.
- To
enable autowizard:
bti7800# autowizard true - To
disable autowizard:
bti7800# autowizard false
- To
enable autowizard:
