Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Supported MIBs

    You can download supported MIBs from https://www.juniper.net/support/downloads by selecting the desired product and release.

    Note: The BTI7800 does not allow create access to any of the supported objects even if the supported object has a MAX-ACCESS value of read-create.

    Table 1 lists the objects supported from the standard MIBs.

    Table 1: Standard MIBs

    MIBs

    RFC

    Supported Objects (OID)

    SYSTEM MIB

    RFC3418

    The following objects from the System Group are supported:

    • sysDescr (1.3.6.1.2.1.1.1)
    • sysObjectID (1.3.6.1.2.1.1.2)
    • sysContact (1.3.6.1.2.1.1.4)
    • sysName (1.3.6.1.2.1.1.5)
    • sysLocation (1.3.6.1.2.1.1.6)
    • sysServices (1.3.6.1.2.1.1.7)
    • sysORLastChange (1.3.6.1.2.1.1.8)

    IF-MIB

    RFC2863

    The following objects from the Interfaces Group are supported.

    • ifTable (1.3.6.1.2.1.2.2)
      • ifEntry (1.3.6.1.2.1.2.2.1)
        • ifIndex (1.3.6.1.2.1.2.2.1.1)
        • ifDescr (1.3.6.1.2.1.2.2.1.2)
        • ifType (1.3.6.1.2.1.2.2.1.3)
        • ifMtu (1.3.6.1.2.1.2.2.1.4)
        • ifAdminStatus (1.3.6.1.2.1.2.2.1.7)
        • ifOperStatus (1.3.6.1.2.1.2.2.1.8)
    • ifXTable (1.3.6.1.2.1.31.1.1)
      • ifXEntry (1.3.6.1.2.1.31.1.1.1)
        • ifName (1.3.6.1.2.1.31.1.1.1.1)
        • ifLinkUpDownTrapEnable (1.3.6.1.2.1.31.1.1.1.14)
        • ifAlias (1.3.6.1.2.1.31.1.1.1.18)
    • snmpTraps (1.3.6.1.6.3.1.1.5)
      • linkDown (1.3.6.1.6.3.1.1.5.3)
      • linkUp (1.3.6.1.6.3.1.1.5.4)

    Note: This MIB is supported for UFM interfaces and for virtual mgt interfaces.

    IP-MIB (supported in releases 2.1.1 and higher)

    RFC4293

    The following objects from the IPv4 address table are supported:

    • ipAddrTable (1.3.6.1.2.1.4.20)
      • ipAddrEntry (1.3.6.1.2.1.4.20.1)
        • ipAdEntAddr (1.3.6.1.2.1.4.20.1.1)
        • ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2) - The index is assigned as follows:
          • shared management IP: 5
          • CMM:1/A eth1 interface: 4101
          • CMM:1/B eth1 interface: 8197
        • ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3)

    Note: This MIB is supported for the shared management IP interface and for the management Ethernet ports (eth1) on both CMMs.

    RMON-MIB (supported in releases 2.1.1 and higher)

    RFC2819

    The following objects from the Ethernet statistics group are supported:

    • statistics (1.3.6.1.2.1.16.1)
      • etherStatsTable (1.3.6.1.2.1.16.1.1)
        • etherStatsEntry (1.3.6.1.2.1.16.1.1.1)
          • etherStatsIndex (1.3.6.1.2.1.16.1.1.1.1)
          • etherStatsDataSource (1.3.6.1.2.1.16.1.1.1.2)
          • etherStatsDropEvents (1.3.6.1.2.1.16.1.1.1.3)
          • etherStatsOctets (1.3.6.1.2.1.16.1.1.1.4)
          • etherStatsPkts (1.3.6.1.2.1.16.1.1.1.5)
          • etherStatsBroadcastPkts (1.3.6.1.2.1.16.1.1.1.6)
          • etherStatsMulticastPkts (1.3.6.1.2.1.16.1.1.1.7)
          • etherStatsCRCAlignErrors (1.3.6.1.2.1.16.1.1.1.8) - This counter considers packets up to a maximum of 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
          • etherStatsUndersizePkts (1.3.6.1.2.1.16.1.1.1.9)
          • etherStatsOversizePkts (1.3.6.1.2.1.16.1.1.1.10) - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
          • etherStatsFragments (1.3.6.1.2.1.16.1.1.1.11)
          • etherStatsJabbers (1.3.6.1.2.1.16.1.1.1.12) - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
          • etherStatsCollisions (1.3.6.1.2.1.16.1.1.1.13)
          • etherStatsPkts64Octets (1.3.6.1.2.1.16.1.1.1.14)
          • etherStatsPkts65to127Octets (1.3.6.1.2.1.16.1.1.1.15)
          • etherStatsPkts128to255Octets (1.3.6.1.2.1.16.1.1.1.16)
          • etherStatsPkts256to511Octets (1.3.6.1.2.1.16.1.1.1.17)
          • etherStatsPkts512to1023Octets (1.3.6.1.2.1.16.1.1.1.18)
          • etherStatsPkts1024to1518Octets (1.3.6.1.2.1.16.1.1.1.19)
          • etherStatsOwner (1.3.6.1.2.1.16.1.1.1.20)
          • etherStatsStatus (1.3.6.1.2.1.16.1.1.1.21)

    Note: This MIB is supported for UFM ethernetCsmacd interfaces only.

    In addition to the objects supported in standard MIBs, the BTI7800 supports a set of enterprise MIBs (Table 2) that can be used to retrieve system inventory, provision equipment and facilities, and monitor faults through trap-based alarm notification and retrieval of active alarms and conditions.

    Table 2: BTI7800 MIBs

    MIBs

    Description

    BTI-MIB

    Top-level BTI Series MIB.

    BTI7800-MIB

    Top-level BTI7800 MIB.

    BTI7800-NOTIFICATIONS-MIB

    Contains trap information for each alarm and condition.

    BTI7800-CONDITIONS-MIB

    Contains objects relating to the retrieval of active alarms and conditions.

    BTI7800-EQUIPMENT-MIB

    Contains objects relating to the system equipment.

    BTI7800-INVENTORY-MIB

    Contains objects relating to the system inventory.

    BTI7800 enterprise MIBs have the following hierarchy within the enterprise (1.3.6.1.4.1) branch:

    • btiSystems (1.3.6.1.4.1.18070)
      • btiProducts (1.3.6.1.4.1.18070.2)
        • bti7800 (1.3.6.1.4.1.18070.2.9)
          • BTI7800-CONDITIONS-MIB (1.3.6.1.4.1.18070.2.9.1)
          • BTI7800-NOTIFICATIONS-MIB (1.3.6.1.4.1.18070.2.9.2)
          • BTI7800-MIB (1.3.6.1.4.1.18070.2.9.3)
            • BTI7800-EQUIPMENT-MIB (1.3.6.1.4.1.18070.2.9.3.1)
            • BTI7800-INVENTORY-MIB (1.3.6.1.4.1.18070.2.9.3.2)

    Load Order

    You must only load MIB files that are associated with the software load running on the BTI7800 system. Always unload all previous versions of MIB files before installing new versions.

    Note: The MIBs must be loaded in the order listed:

    • BTI7800-NOTIFICATIONS-MIB
    • BTI7800-CONDITIONS-MIB
    • BTI7800-EQUIPMENT-MIB
    • BTI7800-INVENTORY-MIB

    Release History Table

    Release
    Description
    2.1.1
    IP-MIB
    2.1.1
    RMON-MIB

    Modified: 2017-07-13

    Previous Page Next Page