Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    protection wavelength group

    Syntax

    [no] protection wavelength group wpsgroup:location_id [protid string | remote-protid string | custom string | revertive-type type | working wpsport:location_id | protecting wpsport:location_id | revertive-time time]

    Description

    This command sets parameters for the specified wavelength protection group (wpsgroup) on the WPS4. If the wavelength protection group does not exist, the wavelength protection group is created.

    Note: Creating the wavelength protection group will automatically create the client and line ports associated with the group.

    Options

    Parameter

    Description

    Range

    Default Value

    wpsgroup:location_id

    Protection wavelength group identifier

    See Location Identifiers.

    None

    protid string

    A user-defined identifier of the protection group

    0 to 32 alphanumeric characters

    An empty string

    protid-remote string

    A user-defined identifier of the remote protection group

    0 to 32 alphanumeric characters

    An empty string

    custom string

    User-defined string

    0 to 255 alphanumeric characters

    An empty string

    revertive-type type

    Determines whether traffic will revert to the working line following a protection switch when the defect on the line clears. Applies to automatic, manual, forced and lockout switches.

    revertive

    non-revertive

    non-revertive

    working wpsport:location_id

    The line port designated as the working port.

    This parameter is automatically assigned by the system.

    If specified, the port must be line port A associated with the group.

    See Location Identifiers.

    Port A is the working port associated with the wavelength protection group.

    protecting wpsport:location_id

    The line port designated as the protecting port.

    This parameter is automatically assigned by the system

    If specified, the port must be line port B associated with the group.

    See Location Identifiers.

    Port B is the protecting port associated with the wavelength protection group.

    revertive-time time

    The time, in seconds, that must pass before activity reverts to the working line after the conditions causing the protection switch have cleared.

    Applies only if the group is in revertive mode.

    This parameter is not configurable.

    600

    600

    Required Privilege Level

    Sample Output

    bti7800(config)# protection wavelength group wpsgroup:1/3/1

    Modified: 2017-07-21