Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    system upgrade

    Syntax

    system upgrade cancelsystem upgrade commitsystem upgrade downloadsystem upgrade firmware optionssystem upgrade remote-url protocol:url [ password password ]system upgrade rollback

    Release Information

    This command was introduced prior to release 2.1.1.

    Starting with release 4.2, the system automatically retries the system upgrade commit command if the initial commit fails.

    Description

    This command performs operations related to system software upgrades.

    Note: You must have superuser privileges to use this command.

    Options

    Parameter

    Description

    Range

    Default Value

    cancel

    Cancels a software download if one is in progress.

    commit

    Loads the new software on all modules.

    Software-based features on the service module (such as PM collection, APSD, APR, FPSD) are disabled temporarily until the module boots back up.

    Note: Starting with release 4.2, the system automatically retries the commit if the initial commit fails.

    download

    Downloads the new software package from the remote-url to local storage.

    The new software package must be in an RPM format.

    firmware options

    Upgrades the firmware on a specified module. See system upgrade firmware.

    remote-url protocol:url

    The remote location where you want to copy the system log file(s).

    sftp|ftp://
    [username@]host
    [:port]/filename

    username is the username to use on the remote server.

    host is the host name or IP address of the remote server.

    port is the protocol port number to use.

    filename is the filepath and filename of the software package. The file must be an RPM file.

    If username is not specified, the current CLI session’s login name is used.

    If port is not specified, the standard default FTP or SFTP port is used.

    password password

    The password associated with the specified username.

    If a password is not specified, the system prompts you for a password.

    Note: The password must contain alphanumeric characters only.

    A character string

    None

    rollback

    Rolls back to the software and configuration in effect on all modules immediately prior to the upgrade. This command is service affecting.

    Software-based features on the service module (such as PM collection, APSD, APR, FPSD) are disabled temporarily until the module boots back up.

    Note: You might need to perform a cold reboot of all modules after rolling back. For more information, see the BTI7800 Series Software Configuration Guide.

    Required Privilege Level

     

    Related Documentation

     

    Sample Output

    bti7800# system upgrade remote-url ftp://user@172.25.5.100/sw/bti7800-sys-1.6.0-14211.x86_64.rpm
    Value for 'password' (<string>): ******** 
    bti7800# system upgrade download 
    bti7800# show system upgrade 
    Current Status : download-success  
    bti7800# system upgrade commit 
    CAUTION: Would you like to Proceed? [no,yes] yes 

    For more information on performing software upgrades, see the BTI7800 Series Software Configuration Guide.

    Modified: 2017-07-21