system upgrade firmware
Syntax
Description
This command performs operations related to firmware upgrades.
![]() | Note: You must have superuser privileges to use this command. |
Options
Parameter | Description | Range | Default Value |
---|---|---|---|
ipmc module module_id | Upgrades the ipmc firmware on the specified traffic module | See equipment chassis module for the correct syntax for module identifiers. | None |
l2-switch chassis_id | Upgrades the l2-switch firmware on the CMM | A valid chassis identifier (for example, chassis:1) | None |
shmm chassis_id | Upgrades the shmm firmware on the CMM | A valid chassis identifier (for example, chassis:1) | None |
force | Forces an ipmc firmware upgrade | – | – |
Required Privilege Level
Sample Output
bti7800# system upgrade firmware shmm chassis:1
For more information on performing firmware upgrades, see the BTI7800 Series Software Configuration Guide.