Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    show system ntpstat

    Syntax

    show system ntpstat

    Description

    This command displays information for the configured NTP server.

    Options

    Parameter

    Description

    Range

    remote

    The host name or IP address of the NTP peer

    refid

    As association ID

    st

    NTP stratum level

    0 to 15

    16 indicates a device is not synchronized.

    t

    NTP server or client type

    u: unicast or manycast client

    b: broadcast or multicast client

    1: local (reference clock)

    s: symmetric (peer)

    A: manycast server

    S: broadcast server

    M: multicast server

    when

    The number of seconds, minutes, or hours since the last received packet

    poll

    The poll interval

    reach

    The reach shift register (octal)

    delay

    The roundtrip delay

    offset

    The offset of the server relative to this host

    jitter

    The jitter

    Required Privilege Level

     

    Related Documentation

     

    Sample Output

    bti7800# show system ntpstat
          remote         refid  st     t     when   poll    reach    delay    offset  jitter 
    ======================================================================================= 
    10.1.1.3           .ACTS.   1     u     16     128     377      13.592   69.346  21.728 2
    LOCAL(0)           .LOCL.  14     l     64m     64       0       0.000    0.000   0.000 

    Modified: 2017-07-21