amp wdm
Syntax
Description
This command configures and monitors WDM (Wavelength Division Multiplexing) on equipment modules assigned to optical layer groupings.
Options
Parameter | Description | Range | Default Value |
|---|---|---|---|
admin-status | The administrative status of the WDM object | down up | up |
amp-tilt-trim | The tilt control parameters | A decimal number, in the format: x.x | 0.0 |
custom1, 2, 3 | User-defined information about the WDM object | – | – |
fiber-type | The fiber type that connects to the amplifier Note: Once configured, the system automatically compensates for the tilt. | eleaf ssmf twcl twrs | ssmf |
ol-id | The user-defined identifier for the optical layer equipment | 1 to 32 characters | – |
post-amp-gain | The post-amp gain control in dB | A decimal number, in the format: x.x | 4.0 |
span-loss-rxhighth | The span loss threshold in dB | A decimal number, in the format: x.x
| 0.0 |
Required Privilege Level
Sample Output
bti7800(config)# amp wdm wdm:1/6/1/1 bti7800(config-wdm-wdm:1/6/1/1)# fiber-type twcl bti7800(config-wdm-wdm:1/6/1/1)# exit bti7800(config) commit Commit complete.
