RF
Table 1: Condition Details
Parameter | Description |
|---|---|
Code | rf |
Description/Cause | Remote Fault: The local interface has received a remote-fault signal from the NE at the far end of the fiber, indicating that no Ethernet signal is being transmitted downstream of (and away from) the local NE. (See also Maintenance Signaling.) |
Entities Affected | Ethernet interfaces (see respective table below). |
Default Severity | Not alarmed. |
Service Affecting | No (false). |
Condition Clearing | |
Related Fault Hierarchy |
Table 2: Ethernet Interfaces
Entity Name | Fault Indicator | ||
|---|---|---|---|
Module | Indicator | Status | |
100ge:<chassis>/<slot>/<subslot>/<port>/<subport> | 1x CFP BIC | – | – |
100ge:<chassis>/<slot>/<1>/<port> | UFM6 | ||
10ge:<chassis>/<slot>/<1>/<port>/<subport> | UFM6 | ||
10ge:<chassis>/<slot>/<subslot>/<port>/<subport> | 12x SFP+ BIC | ||
Clearing an RF Condition
 | Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide. |
- Check for and clear all alarms downstream of the local NE.
- Check for conditions on the local interface.
- If the condition clears, you have completed this procedure.
- If the condition does not clear, contact your next level of support.
