Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    LaserTempHighTh

    Table 1: Alarm Details

    Parameter

    Description

    Code

    laserTempHighTh

    Description

    Laser Temperature Above High Temperature Threshold: The transmit laser temperature has exceeded the high temperature threshold.

    Entities Affected

    • Optical channel interfaces (see respective table below).
    • OTN OTU interfaces (see respective table below).
    • Ethernet interfaces (see respective table below).
    • SONET/SDH interfaces (see respective table below).
    • Wavelength channels (see respective table below).

    Possible Causes

    The transmit laser is malfunctioning.

    Default Severity

    Major

    Service Affecting

    No (false).

    Alarm Clearing

    See Clearing a LaserTempHighTh alarm.

    Related Fault Hierarchy

    See OTN interface fault hierarchy.

    Table 2: Optical Channel Interfaces

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    och:<chassis>/<slot>/<2>/<1>/<subport.och>

    UFM6

    Fault LED, 200G line port

    On

    Table 3: OTN OTU Interfaces

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    otu4:<chassis>/<slot>/<1>/<1>

    UFM4

    Fault LED, 100G line port

    On

    otu4:<chassis>/<slot>/<subslot>/<port>

    1x CFP BIC

    Fault LED, 100G port

    otu2:<chassis>/<slot>/<subslot>/<port>

    12x SFP+ BIC

    Fault LED, 10G port

    otu2e:<chassis>/<slot>/<subslot>/<port>

    Note: Supported on UFM3 only.

    Table 4: Ethernet Interfaces

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    100ge:<chassis>/<slot>/<subslot>/<port>/<subport>

    1x CFP BIC

    Fault LED, 100G port

    On

    100ge:<chassis>/<slot>/<1>/<port>

    UFM6

    Fault LED, 100G port

    10ge:<chassis>/<slot>/<1>/<port>/<subport>

    UFM6

    Fault LED, 10G port

    10ge:<chassis>/<slot>/<subslot>/<port>/<subport>

    12x SFP+ BIC

    Fault LED, 10G port

    Table 5: SONET/SDH Interfaces

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    oc192:<chassis>/<slot>/<subslot>/<port>

    12x SFP+ BIC

    Fault LED, 10G port

    On

    wanoc192:<chassis>/<slot>/<subslot>/<port>

    stm64:<chassis>/<slot>/<subslot>/<port>

    wanstm64:<chassis>/<slot>/<subslot>/<port>

    Table 6: Wavelength Channels

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    channel:<chassis>/<slot>/<subslot>/<port.channel>

    1x CFP BIC1

    Fault LED, 100G port

    On

    1 Reporting of this alarm for a wavelength channel is supported only on multiwavelength CFP transceivers.

    Clearing a LaserTempHighTh Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    Note: Refer to the BTI7800 Series Hardware Overview and Installation Guide before replacing a traffic module or a transceiver.

    1. Optionally, retrieve detailed information for the interface to view the Laser Temperature and Laser Temperature Max. Threshold values:
      show interface name:identifier detail
    2. Replace either the pluggable transceiver installed in the port or, if the alarm is raised against an interface provisioned on an integrated MSA, the UFM.
    3. Check for alarms on the interface.
      • If the alarm clears, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-07-06