Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    EqptDgrd

    Table 1: Alarm Details

    Parameter

    Description

    Code

    eqptDgrd

    Description/Cause

    Equipment Degrade: Initialization of a module has failed.

    Entities Affected

    Traffic modules (see respective table below).

    Default Severity

    Major

    Service Affecting

    Yes (true).

    Alarm Clearing

    See Clearing an EqptDgrd alarm.

    Related Fault Hierarchy

    See Equipment fault hierarchy.

    Table 2: Traffic Modules

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    ufm:<chassis>/<slot>

    UFM

    See BTI7800 Series Module and BIC LED Behavior.

    bic:<chassis>/<slot>/<subslot>

    1x CFP BIC or 12x SFP+ BIC

    Clearing an EqptDgrd Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    Note: Refer to the BTI7800 Series Software Configuration Guide before either rebooting or changing the administrative status of equipment.

    1. Do the following:
      • For a UFM module, perform a cold reboot of the module.
      • For a BIC module, administratively disable the module, and then administratively enable it.
    2. Check for alarms on the module.
      • If the alarm has cleared, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-07-06