AirFilterAbsence
Table 1: Alarm Details
Parameter | Description |
|---|---|
Code | AirFilterAbsence |
Description/Cause | Air Filter Absent: The air filter required for operation of the chassis has not been detected in the chassis. |
Entities Affected | BTI7800 chassis (see table below). Note: This alarm is supported on the BTI7814 chassis only. |
Default Severity | Major |
Service Affecting | No (false). |
Alarm Clearing | |
Related Fault Hierarchy | – |
Table 2: BTI7800 Chassis
Entity Name | Fault Indicator | ||
|---|---|---|---|
Equipment | Indicator | Status | |
chassis:<1 | 2> | BTI7814 | See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide. | |
Clearing an AirFilterAbsence Alarm
 | Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide. |
| Note: Refer to the BTI7800 Series Hardware Overview and Installation Guide before installing equipment in the chassis. |
- Confirm whether an air filter is present in the chassis.
- Ensure that the air filter is properly seated in the chassis, and then go to 4.
- Install an air filter in the chassis.
- Check
for alarms on the chassis.
- If the alarm clears, you have completed this procedure.
- If the alarm does not clear, contact your next level of support.
