Auto-Provisioning of BTI7800 Equipment
When a hardware module is inserted into an unprovisioned slot, the BTI7800 detects the insertion, and discovers and auto-provisions the module (if auto-provisioning is enabled). Auto-provisioning refers to the BTI7800 automatically adding discovered equipment, including their locations and PECs, to the equipment branch of the component tree. In some cases, it might refer to automatic detection and provisioning of other hardware components. See the BTI7800 Command Line Reference Guide for details.
If the slot that the module is inserted into has been pre-provisioned, then the module is not auto-provisioned. Instead, the inserted module is validated against the pre-provisioning, and if any differences are detected, the BTI7800 raises an equipment mismatch alarm (eqptMism).
Auto-provisioning can be enabled or disabled. See Configuring Auto-Provisioning for details on how to change the auto-provisioning setting.
To see the list of hardware modules that are in the equipment branch of the component tree, use the show equipment command. For example (truncated for clarity):
bti7800# show equipment Chassis PEC Admin State Oper State --------------- ----------- ----------- ---------- chassis:1 BT8A78CH14 enabled up Module PEC Admin State Oper State ---------- -------------- ----------- -------------- cap:1/1 BT8A78CAP1 enabled up cmm:1/A BT8A78CMM1 enabled up fan:1/1 BT8A78FAN3 enabled up fan:1/2 BT8A78FAN3 enabled up fan:1/3 BT8A78FAN3 enabled up fan:1/4 BT8A78FAN3 enabled up pem:1/1 BT8A78ACM1 enabled up pem:1/3 BT8A78ACM1 enabled up ufm:1/2 BT8A78UFM3 enabled notPresent ufm:1/5 BT8A78UFM3 enabled up ufm:1/7 BT8A78UFM4 enabled notPresent ufm:1/8 BT8A78UFM4 enabled up ufm:1/10 BT8A78UFM4 enabled up BIC PEC Admin State Oper State ------------- ------------ ----------- ----------- bic:1/2/1 BT8A78CFP1G enabled notPresent bic:1/5/1 BT8A78CFP1G enabled notPresent bic:1/5/2 BT8A78CFP1G enabled down bic:1/7/2 BT8A78CFP1G enabled notPresent bic:1/8/2 BT8A78SFP12G enabled up bic:1/10/2 BT8A78SFP12G enabled up Transceiver PEC Admin State Oper State Optical Format ------------------- ------------ ----------- ----------- -------------- cfp:1/5/1/1 enabled notPresent fixedX10 cfp:1/5/2/1 enabled notPresent tunableX1 msa:1/7/1/1 enabled notPresent tunableX1 cfp:1/7/2/1 enabled notPresent tunableX1 msa:1/8/1/1 enabled up tunableX1 sfpPlus:1/8/2/1 enabled up fixedX1 sfpPlus:1/8/2/4 enabled up fixedX1 sfpPlus:1/8/2/5 enabled up fixedX1 sfpPlus:1/8/2/6 enabled up fixedX1 sfpPlus:1/8/2/8 BP3AD6SS enabled up fixedX1 sfpPlus:1/8/2/9 BP3AD6SS enabled up fixedX1 msa:1/10/1/1 enabled up tunableX1 sfpPlus:1/10/2/1 enabled up fixedX1 sfpPlus:1/10/2/2 enabled up fixedX1 sfpPlus:1/10/2/3 enabled up fixedX1 sfpPlus:1/10/2/4 BP3AM6MS enabled up fixedX1 sfpPlus:1/10/2/5 enabled up fixedX1 sfpPlus:1/10/2/6 enabled up fixedX1 sfpPlus:1/10/2/7 BP3AD6SS enabled up fixedX1 sfpPlus:1/10/2/8 BP3AD6SS enabled up fixedX1 sfpPlus:1/10/2/9 BP3AD6SS enabled up fixedX1 sfpPlus:1/10/2/10 BP3AD6SS enabled up fixedX1 sfpPlus:1/10/2/11 BP3AD6SS enabled up fixedX1 sfpPlus:1/10/2/12 BP3AD6SS enabled up fixedX1
