Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Supported MIBs

    The BTI7800 MIBs can be downloaded from https://www.juniper.net/support/downloads by selecting the desired product and release.

    Table 1: Supported MIBs

    MIBs

    Description

    Standard MIBs

    MIB II SYSTEM

    Contains a description of the managed node.

    MIB II INTERFACE

    Contains information on most interfaces on the managed node. The following objects are supported:

    • ifEntry
    • ifIndex
    • ifDescr
    • ifType
    • ifMtu
    • ifAdminStatus
    • ifOperStatus
    • ifXEntry
    • ifName
    • ifLinkUpDownTrapEnable
    • ifAlias
    • linkDown trap
    • linkUp trap

    Note: This MIB is supported for all UFM interfaces and for the virtual mgt interfaces.

    IP MIB

    Contains IP addressing information for most management IP interfaces on the managed node. The following objects are supported:

    • ipAddrEntry
    • ipAdEntAddr
    • ipAdEntIfIndex, assigned as follows:
      • shared management IP: 5
      • CMM:1/A eth1 interface: 4101
      • CMM:1/B eth1 interface: 8197
    • ipAdEntNetMask

    Note: This MIB is supported for the shared management IP interface, and for the management Ethernet ports (eth1) on both CMMs.

    RMON MIB

    Contains network monitoring statistics for UFM ethernetCsmacd interfaces on the managed node. The following objects (from the Ethernet statistics group) are supported:

    • statistics
    • etherStatsTable
    • etherStatsEntry
    • etherStatsIndex
    • etherStatsDataSource
    • etherStatsDropEvents
    • etherStatsOctets
    • etherStatsPkts
    • etherStatsBroadcastPkts
    • etherStatsMulticastPkts
    • etherStatsCRCAlignErrors - This counter considers packets up to a maximum of 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
    • etherStatsUndersizePkts
    • etherStatsOversizePkts - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
    • etherStatsFragments
    • etherStatsJabbers - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.
    • etherStatsCollisions
    • etherStatsPkts64Octets
    • etherStatsPkts65to127Octets
    • etherStatsPkts128to255Octets
    • etherStatsPkts256to511Octets
    • etherStatsPkts512to1023Octets
    • etherStatsPkts1024to1518Octets
    • etherStatsOwner
    • etherStatsStatus

    BTI7800 MIBs

    BTI-MIB

    Top-level MIB.

    BTI7800-MIB

    Top-level BTI7800 MIB.

    BTI7800-NOTIFICATIONS-MIB

    Contains trap information for each alarm and condition.

    BTI7800-CONDITIONS-MIB

    Contains objects relating to the retrieval of active alarms and conditions.

    BTI7800-EQUIPMENT-MIB

    Contains objects relating to the system equipment.

    BTI7800-INVENTORY-MIB

    Contains objects relating to the system inventory.

    BTI7800 MIBs support:

    • the retrieval of system inventory information
    • the provisioning of equipment and facilities
    • the monitoring of faults through trap-based alarm notification and retrieval of active alarms and conditions

    Load Order

    You must only load MIB files that are associated with the software load running on the BTI7800 system. Always unload all previous versions of MIB files before installing new versions.

    Note: The MIBs must be loaded in the order listed:

    • BTI7800-NOTIFICATIONS-MIB
    • BTI7800-CONDITIONS-MIB
    • BTI7800-EQUIPMENT-MIB
    • BTI7800-INVENTORY-MIB

    Modified: 2017-04-13