Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Supported YANG Modules

    The BTI7800 YANG modules can be downloaded from https://www.juniper.net/support/downloads by selecting the desired product and release.

    The following table lists the BTI7800-specific YANG modules and indicates whether they can be used by third-party NETCONF clients. Only those modules labeled as "usable" can be used by customers running third-party clients. All other modules are for internal use or for the use of the proNX Service Manager.

    Module

    Description

    Supported for third-party NETCONF clients

    atlas-aaa.yang

    The module defining user profile parameters.

    Not for use by third-party NETCONF clients.

    atlas-amp.yang

    The submodule defining 96-Channel Amplifier (AMP1) modules.

    Not for use by third-party NETCONF clients.

    atlas-circuits.yang

    The submodule defining transport cross-connects.

    Not for use by third-party NETCONF clients.

    atlas-conditions.yang

    The module defining BTI7800 alarms and conditions.

    Usable for fault management.

    atlas-debug.yang

    The submodule defining debug data.

    Not for use by third-party NETCONF clients.

    atlas-dol-common.yang

    atlas-dol-hidden.yang

    atlas-dol.yang

    Modules and submodules defining ROADM objects and parameters.

    Not for use by third-party NETCONF clients.

    atlas-equipment.yang

    The submodule defining equipment objects.

    Usable for inventory management.

    atlas-eth-if.yang

    The submodule defining Ethernet interfaces.

    Not for use by third-party NETCONF clients.

    atlas-if-protection.yang

    The submodule defining interface protection.

    Not for use by third-party NETCONF clients.

    atlas-interfaces.yang

    The module defining interfaces.

    Not for use by third-party NETCONF clients.

    atlas-internal.yang

    The module defining internal objects.

    Not for use by third-party NETCONF clients.

    atlas-logging.yang

    The submodule defining logging.

    Not for use by third-party NETCONF clients.

    atlas-mgmt-interface.yang

    atlas-mgt-comn.yang

    atlas-mgt-static.yang

    atlas-mgt-vrf.yang

    atlas-mgt.yang

    Modules and submodules defining management and management networking objects and parameters.

    Not for use by third-party NETCONF clients.

    atlas-notif.yang

    The submodule defining notifications.

    Not for use by third-party NETCONF clients.

    atlas-otn-if.yang

    The submodule defining OTU and ODU interfaces.

    Not for use by third-party NETCONF clients.

    atlas-phy-if.yang

    The submodule defining physical layer attributes common to all interfaces.

    Not for use by third-party NETCONF clients.

    atlas-products.yang

    The module defining BTI7800 orderable products.

    Not for use by third-party NETCONF clients.

    atlas-snmp.yang

    The module defining SNMP objects and parameters and inventory.

    Not for use by third-party NETCONF clients.

    atlas-sonet-if.yang

    The submodule defining SONET and SDH interfaces.

    Not for use by third-party NETCONF clients.

    atlas-statistics.yang

    The submodule defining PMs and statistics.

    Usable for performance management. Not for historical PM use.

    atlas-systemDateTime.yang

    The module defining system date and time.

    Required by atlas-system.yang.

    atlas-system.yang

    The submodule defining system-level attributes.

    Usable for network element discovery. Requires atlas-systemDateTime.yang.

    atlas-types.yang

    The module defining common parameter types used in other modules and submodules.

    Required by most modules and submodules. Should be included for all use cases.

    atlas-user.yang

    The submodule defining user management and authentication.

    Not for use by third-party NETCONF clients.

    atlas-virtual-if.yang

    The submodule defining virtual interfaces.

    Not for use by third-party NETCONF clients.

    atlas-wavelength-protection.yang

    The submodule defining WPS protection groups.

    Not for use by third-party NETCONF clients.

    atlas.yang

    A top-level module containing various submodules.

    Not for use by third-party NETCONF clients.

    Note: In addition to the BTI7800 YANG modules, the BTI7800 YANG implementation depends on a number of standard YANG modules. These are also supplied by Juniper Networks.

    Modified: 2017-04-13