Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    show dol oms

    Syntax

    show dol oms[:identifier] [ detail | table ]

    Description

    This command shows information on all optical multiplex sections, or information on a particular optical multiplex section if a particular optical multiplex section is specified.

    Options

    Parameter

    Description

    Range

    oms:identifier

    Displays information on the specified OMS

    An existing optical multiplex section (for example, oms:1/5/0/C1)

    detail

    Displays information in detailed form

    table

    Displays information in tabular form. This is the default

    Required Privilege Level

     

    Related Documentation

     

    Sample Output

    The following output has been truncated for clarity.

    bti7800# show dol oms
    Dynamic Optical Layer Optical Multiplex Sections 
    ------------------------------------------------  
    
    Oms Name       Admin State  Oper State  PRE State       OL Id  Custo 
    -------------  -----------  ----------  --------------  -----  ----- 
    oms:1/5/0/C1   enabled      unknown     Not Applicable 
    oms:1/5/0/L1   enabled      unknown     disabled 
    oms:1/6/0/C1   enabled      unknown     Not Applicable 
    oms:1/6/0/C2   enabled      unknown     Not Applicable 
    oms:1/6/0/L1   enabled      unknown     disabled 
    oms:1/8/0/C1   enabled      unknown     Not Applicable 
    oms:1/8/0/C2   enabled      unknown     Not Applicable 
    oms:1/8/0/L1   enabled      unknown     disabled 
    oms:1/9/0/C1   enabled      unknown     Not Applicable 
    oms:1/9/0/C2   enabled      unknown     Not Applicable 
    oms:1/9/0/L1   enabled      unknown     disabled  

    Modified: 2017-04-25