Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    show dol fiber-conn


    show dol fiber-conn [ endpoint1[ endpoint2 ] | detail | table ]


    This command shows information on all fiber connections, or information on a particular fiber connection if a particular fiber connection is specified.





    endpoint1 endpoint2

    Displays informatiion for the fiber connection that has the specified endpoints

    Existing fiber-conn endpoints (for example, otu4:1/3/2/1).


    Displays informatiion in detailed form


    Displays information in tabular form. This is the default.

    Required Privilege Level


    Related Documentation


    Sample Output

    bti7800# show dol fiber-conn
    Dynamic Optical Layer Fiber Connections 
    Endpoint 1       Endpoint 2                    Fiber Type  Endpoint 1 FE Port           Endpoint 2 FE Port 
    ---------------  ----------------------------  ----------  ---------------------------  ------------------ 
    otu4:1/2/1/1     port:0/30/0/C49               n/a         NOT-CONNECTED                NOT-CONNECTED 
    port:0/30/0/L1   port:1/1/0/C1                 n/a         NOT-CONNECTED                NOT-CONNECTED 
    port:1/1/0/C2    port:1/2/0/C2                 n/a         port:1/2/0/C2                port:1/1/0/C2 
    port:1/1/0/L1    port:1/1/0/L1@   ndsf        port:1/1/0/L1@  REMOTE 

    The NOT-CONNECTED designation means that the fiber-conn endpoints are unable to exchange endpoint information. This can occur when the physical fiber is not connected, or when one endpoint is on a UFM or on a multiplexer/demultiplexer. (Sometimes this is shown as a blank instead of NOT-CONNECTED).

    The REMOTE designation under Endpoint 2 FE Port occurs when the two endpoints reside on different network elements. This is typically the case for a fiber-conn between line ports, but can also occur for a fiber-conn between client ports in a split ROADM node configuration.

    Modified: 2017-04-25