Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show amp

    Syntax

    show amp [ identifier | detail | table ]

    Description

    This command displays information for the amplifier module.

    Options

    Parameter

    Description

    identifier

    Displays detailed information for the specified amplifier module

    detail

    Displays detailed information for all amplifier modules

    table

    Displays information for all amplifier modules in table format

    Additional Information

    You must assign the amplifier to a group before the amplifier can be displayed.

    Required Privilege Level

    Sample Output

    bti7800# show amp amp:1/6
    Amp Name                      : amp:1/6  
    Group                         : 1  
    Group  type                   : noEqlzTerm  
    Degree                        : 1   
    Port Name                     : osc:1/6/1/1.1  
    Admin Status                  : enabled  
    Operational State             : up  
    ID                            :  
    Optical Power RX              :   0.0 dBm  
    Optical Power TX              :   0.0 dBm  
    Optical Back Reflection       :   0.0 dBm  
    Far-end Node Mismatch         : disabled  
    Expected Far-end System ID    :  
    Expected Far-end IP Address   : 0.0.0.0  
    Expected Far-end Degree       : 0  
    Expected Far-end Group        : 0  
    Actual Far-end System ID      :  
    Actual Far-end IP Address     : 10.1.220.74  
    Actual Far-end Degree         : 1  
    Actual Far-end Group          : 1  
    Actual Far-end Group type     : noEqlzTerm  
    Conditions                    :  
    Alarms                        :   
    
    Port Name                     : line:1/6/1/1  
    Operational State             : up  
    AINS Admin State              : disabled  
    AINS Timer                    : 08:00  
    AINS Countdown Timer          :  
    ID                            :  
    Optical Power RX              :   0.0 dBm  
    Optical Power TX              :   0.0 dBm  
    Optical Loss in RX Direction  :   0.0 dB  
    Optical Loss in TX Direction  :   0.0 dB  
    Conditions                    : tLossRxHt: Loss high threshold exceeded, receive.  
    Alarms                        : tLossRxHt: Loss high threshold exceeded, receive.   
    
    Port Name                     : client:1/6/1/1  
    Operational State             : up  
    AINS Admin State              : disabled  
    AINS Timer                    : 08:00  
    AINS Countdown Timer          :  
    ID                            :  
    Optical Power RX              :   0.0 dBm  
    Optical Power TX              :   0.0 dBm  
    APR Optical Back Reflection   :   0.0 dB  
    Optical Loss in TX Direction  :   0.0 dB  
    Conditions                    :  
    Alarms                        :   
    
    Port Name                     : wdm:1/6/1/1  
    Admin Status                  : enabled  
    Operational  State            : up  
    ID                            :  
    Fiber-Type                    : ssmf  
    Post Amp Gain                 : 4.0 dB  
    Amp Tilt Trim                 : 0.0 dB  
    Length of Span                : 0  km  
    Span Loss RX High Threshold   : 10.0 dB  
    Conditions                    :  
    Alarms                        :   
    
    Port Name                     : dcm:1/6/1/1  
    Operational State             : up  
    AINS Admin State              : disabled  
    AINS Timer                    : 08:00  
    AINS Countdown Timer          :  
    ID                            :  
    Optical Power Loss RX         : 0.0 dB  
    Conditions                    :  
    Alarms                        : 

    The unit for back reflection is different on the OSC and Client ports. On the OSC, the unit is dBm. It is a directly-measured power reading since the OSC transmit power is fixed. On the Client port, the unit is dB, since the power reading is the reflected power relative to the transmit power.

    Modified: 2017-03-10