equipment chassis module ufm bic transceiver
Syntax
Description
This command sets parameters for the specified transceiver within a BIC. If the transceiver does not yet exist, the transceiver is created.
Options
Parameter | Description | Range | Default Value |
|---|---|---|---|
chassis_id | The chassis identifier | chassis_id:
| None |
module module_id | The UFM module identifier | module_id:
| None |
bic bic_id | The BIC identifier | bic_id:
| None |
transceiver transceiver_id | The transceiver identifier | transceiver_id:
| None |
admin-status status | Sets the administrative status of the transceiver | status:
| up |
custom1, custom2, custom3 string | Customizable text field for operator's use | 0 to 255 characters. | An empty string |
optical-format format | The optical format | format:
Note: Depending on the transceiver, the channels can represent wavelengths or be physically separate. See Optical Formats . | None |
pec pec | The transceiver product equipment code | A pre-defined product code | None |
Required Privilege Level
Sample Output
The following example configures an 12x SFP+ BIC with a fixedX1 transceiver type.
bti7800(config)# equipment chassis:2 module ufm:2/1
bic bic:2/1/1 transceiver sfpPlus:2/1/1/3 Value for 'optical-format' [fixedX1,fixedX4,fixedX10,tunableX1,...]: fixedX1 bti7800#(config-transceiver-sfpPlus:2/1/1/3)# commit Commit complete. bti7800#(config-transceiver-sfpPlus:2/1/1/3)#
