Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    dol port


    [no] dol port:location_id [ custom1 string | custom2 string | custom3 string | ol-id string ]


    This command sets parameters for the specified DOL port.

    Note: Ports are automatically created on a DOL module when the module is added, and automatically deleted when the module is deleted. You do not need to create or delete ports explicitly.

    A DOL port can be any of the following:

    • a ROADM client, line, or PRE port
    • an ILA client, line, or PRE port
    • a port on the PRE module
    • a multiplexer/demultiplexer client or line port

    When a port is created on a ROADM or ILA module, the corresponding OMS and OSC are automatically created. When a port is deleted on a ROADM or ILA module, the corresponding OMS and OSC are automatically deleted.





    Default Value


    The port identifier.

    The location identifier consists of the chassi, module, and port locations.


    • port:chassis/slot/0/Cn for the client ports, where the range of n depends on the module
    • port:chassis/slot/0/L1 for the line port
    • port:chassis/slot/0/PRE for the PRE port


    • port:chassis/slot/1/PRE for the port on the PRE module itself


    • port:0/slot/0/Cn for the client ports
    • port:0/slot/0/L1 for the line port


    custom1, custom2, custom3 string

    Customizable text field for operator's use

    0 to 255 characters

    An empty string

    ol-id string

    Customizable text identifying the optical layer managed object

    0 to 32 characters

    An empty string

    Required Privilege Level


    Related Documentation


    Sample Output

    The following sets the optical layer identifier:

    bti7800(config)# dol port:1/2/0/L1 ol-id nyc-2-L1
    bti7800(config-dol-port:1/2/0/L1)# commit 
    Commit complete. 

    Modified: 2017-03-10