Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    amp wdm

    Syntax

    [no] amp wdm <type>:<chassis-number>/<slot-number>/BIC-1/<lineNum>

    Description

    This command configures and monitors WDM (Wavelength Division Multiplexing) on equipment modules assigned to optical layer groupings.

    Options

    Parameter

    Description

    Range

    Default Value

    admin-status

    The administrative status of the WDM object

    down

    up

    up

    amp-tilt-trim

    The tilt control parameters

    A decimal number, in the format: x.x

    0.0

    custom1, 2, 3

    User-defined information about the WDM object

    fiber-type

    The fiber type that connects to the amplifier

    Note: Once configured, the system automatically compensates for the tilt.

    eleaf

    ssmf

    twcl

    twrs

    ssmf

    ol-id

    The user-defined identifier for the optical layer equipment

    1 to 32 characters

    post-amp-gain

    The post-amp gain control in dB

    A decimal number, in the format: x.x

    4.0

    span-loss-rxhighth

    The span loss threshold in dB

    A decimal number, in the format: x.x

    • If the OSC optical power received is ≤ -7 dBm, do not fit a pad.
    • If the OSC optical power received is between -2 and -7 dBm, fit a 5-dB pad to the Line port.
    • If the OSC optical power received is > -2 dBm, fit a 10-dB pad to the Line port.

    0.0

    Required Privilege Level

    Sample Output

    bti7800(config)# amp wdm wdm:1/6/1/1
    bti7800(config-wdm-wdm:1/6/1/1)# fiber-type twcl 
    bti7800(config-wdm-wdm:1/6/1/1)#  exit 
    bti7800(config) commit 
    Commit complete.

    Modified: 2017-04-25