Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ScmNoNmConn

    Table 1: Alarm Details

    Parameter

    Description

    Code

    scmNoNmConn

    Description/Cause

    No Network Management Connectivity on System Controller Module (SCM):

    • In a dual-CMM system, neither SCM can connect to the management IP network.
    • In a single-CMM system, the SCM cannot connect to the management IP network.

    Entities Affected

    Management modules (see respective table below).

    Default Severity

    Critical

    Service Affecting

    Yes (true).

    Alarm Clearing

    See Clearing an scmNoNmConn alarm.

    Related Fault Hierarchy

    Table 2: Management Modules

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    cmm:<chassis>/<slot>

    CMM

    See BTI7800 Series Module and BIC LED Behavior.

    Clearing an ScmNoNmConn Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    1. Ensure that the connections between the management interface and the gateway on the active and standby CMMs is intact.
    2. Check for alarms on the CMM.
      • If the alarm clears, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-04-25