Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    RF

    Table 1: Condition Details

    Parameter

    Description

    Code

    rf

    Description/Cause

    Remote Fault: The local interface has received a remote-fault signal from the NE at the far end of the fiber, indicating that no Ethernet signal is being transmitted downstream of (and away from) the local NE. (See also Maintenance Signaling.)

    Entities Affected

    Ethernet interfaces (see respective table below).

    Default Severity

    Not alarmed.

    Service Affecting

    No (false).

    Condition Clearing

    See Clearing an RF condition.

    Related Fault Hierarchy

    See Ethernet interface fault hierarchy.

    Table 2: Ethernet Interfaces

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    100ge:<chassis>/<slot>/<subslot>/<port>/<subport>

    1x CFP BIC

    100ge:<chassis>/<slot>/<1>/<port>

    UFM6

    10ge:<chassis>/<slot>/<1>/<port>/<subport>

    UFM6

    10ge:<chassis>/<slot>/<subslot>/<port>/<subport>

    12x SFP+ BIC

    Clearing an RF Condition

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    1. Check for and clear all alarms downstream of the local NE.
    2. Check for conditions on the local interface.
      • If the condition clears, you have completed this procedure.
      • If the condition does not clear, contact your next level of support.

    Modified: 2017-03-24