Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    NonCoLocatedController

    Table 1: Alarm Details

    Parameter

    Description

    Code

    nonCoLocatedController

    Description/Cause

    Controllers are in Different Chassis: The active CMMs in a multi-chassis configuration are not located in the same chassis.

    Entities Affected

    Equipment (see respective table below).

    Note: This alarm is supported on the BTI7814 and BTI7802 chassis only.

    Default Severity

    Critical

    Service Affecting

    Yes (true).

    Alarm Clearing

    See NonCoLocatedController.

    Related Fault Hierarchy

    Table 2: Equipment

    Entity Name

     

    Fault Indicator

    Equipment

    Indicator

    Status

    chassis:<1 | 2>

    BTI7814 or BTI7802

    See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide.

    Clearing a NonCoLocatedController Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    1. Retrieve information for the hub and satellite chassis:
      show system chassis
    2. Ensure that multi-chassis system is correctly configured. For information, see the BTI7800 Series Software Configuration Guide.
    3. Check for alarms on the chassis.
      • If the alarm has cleared, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-04-25