Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    EqptMiss

    Table 1: Alarm Details

    Parameter

    Description

    Code

    eqptMiss

    Description/Cause

    Equipment Missing: Provisioned equipment is not physically present in a slot or subslot.

    Entities Affected

    • Equipment (see respective table below).
    • Management and traffic modules (see respective table below).
    • Pluggable transceivers (see respective table below).

    Default Severity

    Critical

    Service Affecting

    Yes (true).

    Alarm clearing

    See Clearing an EqptMiss alarm.

    Related Fault Hierarchy

    See Equipment fault hierarchy.

    Table 2: Equipment

    Entity Name

     

    Fault Indicator

    Equipment

    Indicator

    Status

    fan:<chassis>/<slot>

    Cooling module

    esl:<chassis>/<slot>

    ESL

    pem:<chassis>/<slot>

    PEM

    Table 3: Management and Traffic Modules

    Entity Name

     

    Fault Indicator

    Module

    Indicator

    Status

    cmm:<chassis>/<slot>

    CMM

    ufm:<chassis>/<slot>

    UFM

    bic:<chassis>/<slot>/<subslot>

    BIC

    roadm:<chassis>/<slot>

    ROADM2

    ila:<chassis>/<slot>

    ILA

    amp:<chassis>/<slot>

    AMP1

    wps:<chassis>/<slot>

    WPS4

    Table 4: Pluggable Transceivers

    Entity Name

     

    Fault Indicator

    Transceiver

    Indicator

    Status

    <transceiver-type>:<chassis>/<slot>/<subslot>/<port>

    where transceiver-type corresponds to the type of transceiver installed in the port; for example, cfp, qsfp, qsfp28, or sfpPlus.

    CFP, QSFP+, QSFP28, SFP+

    pre:<chassis>/<slot>

    PRE

    Clearing an EqptMiss Alarm

    Note: Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

    Note: Refer to the BTI7800 Series Hardware Overview and Installation Guide before installing equipment.

    1. Retrieve inventory and provisioned-equipment information:
      show inventory
      show equipment
    2. Confirm whether the equipment (equipment, traffic module, or pluggable transceiver) is present in the slot or subslot.
      • If the equipment is present in the slot or subslot, go to 3.
      • If the equipment is not present in the slot or subslot, go to 4.
    3. Ensure that the equipment is properly seated in the slot or subslot, and then go to 5.
    4. Install the missing equipment, ensuring that its attributes match the attributes of the equipment provisioned for the slot or subslot. For information, see the BTI7800 Hardware Overview and Installation Guide.
    5. Check for alarms on the equipment.
      • If the alarm has cleared, you have completed this procedure.
      • If the alarm does not clear, contact your next level of support.

    Modified: 2017-04-25