Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Pre-Provisioning of BTI7800 Components

    The BTI7800 supports pre-provisioning of components in its component tree. Pre-provisioning refers to the ability for an operator to provision components in advance of hardware installation, thereby allowing the decoupling of the hardware installation workflow from the provisioning workflow. Pre-provisioning is not just limited to equipment provisioning, but can include other provisioning such as the provisioning of services.

    When pre-provisioning, it is normal to see an equipment missing alarm (eqptMiss) because the provisioned equipment is not physically present.

    If a module is inserted into a slot that has been pre-provisioned, the inserted module is validated against the pre-provisioning, and if any differences are detected, the BTI7800 raises an equipment mismatch alarm (eqptMism).

    To see which modules have been pre-provisioned, use the show equipment command. For example (truncated for clarity):

    Note: Modules that have an Oper State of notPresent are examples of pre-provisioning, where provisioning has been performed but the actual module has not been inserted. These modules do not appear in inventory.

    bti7800# show equipment
    Chassis          PEC          Admin State  Oper State   
    ---------------  -----------  -----------  ----------   
    chassis:1        BT8A78CH14   enabled      up  
    
    Module      PEC             Admin State  Oper State      
    ----------  --------------  -----------  --------------  
    cap:1/1     BT8A78CAP1      enabled      up 
    cmm:1/A     BT8A78CMM1      enabled      up 
    fan:1/1     BT8A78FAN3      enabled      up 
    fan:1/2     BT8A78FAN3      enabled      up 
    fan:1/3     BT8A78FAN3      enabled      up 
    fan:1/4     BT8A78FAN3      enabled      up 
    pem:1/1     BT8A78ACM1      enabled      up 
    pem:1/3     BT8A78ACM1      enabled      up 
    ufm:1/2     BT8A78UFM3      enabled      notPresent 
    ufm:1/5     BT8A78UFM3      enabled      up 
    ufm:1/7     BT8A78UFM4      enabled      notPresent 
    ufm:1/8     BT8A78UFM4      enabled      up 
    ufm:1/10    BT8A78UFM4      enabled      up  
    
    BIC            PEC           Admin State  Oper State    
    -------------  ------------  -----------  -----------   
    bic:1/2/1      BT8A78CFP1G   enabled      notPresent 
    bic:1/5/1      BT8A78CFP1G   enabled      notPresent 
    bic:1/5/2      BT8A78CFP1G   enabled      down 
    bic:1/7/2      BT8A78CFP1G   enabled      notPresent 
    bic:1/8/2      BT8A78SFP12G  enabled      up 
    bic:1/10/2     BT8A78SFP12G  enabled      up  
    
    Transceiver          PEC           Admin State  Oper State   Optical Format  
    -------------------  ------------  -----------  -----------  -------------- 
    cfp:1/5/1/1                        enabled      notPresent   fixedX10 
    cfp:1/5/2/1                        enabled      notPresent   tunableX1 
    msa:1/7/1/1                        enabled      notPresent   tunableX1 
    cfp:1/7/2/1                        enabled      notPresent   tunableX1 
    msa:1/8/1/1                        enabled      up           tunableX1 
    sfpPlus:1/8/2/1                    enabled      up           fixedX1 
    sfpPlus:1/8/2/4                    enabled      up           fixedX1 
    sfpPlus:1/8/2/5                    enabled      up           fixedX1 
    sfpPlus:1/8/2/6                    enabled      up           fixedX1 
    sfpPlus:1/8/2/8      BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/8/2/9      BP3AD6SS      enabled      up           fixedX1 
    msa:1/10/1/1                       enabled      up           tunableX1 
    sfpPlus:1/10/2/1                   enabled      up           fixedX1 
    sfpPlus:1/10/2/2                   enabled      up           fixedX1 
    sfpPlus:1/10/2/3                   enabled      up           fixedX1 
    sfpPlus:1/10/2/4     BP3AM6MS      enabled      up           fixedX1 
    sfpPlus:1/10/2/5                   enabled      up           fixedX1 
    sfpPlus:1/10/2/6                   enabled      up           fixedX1 
    sfpPlus:1/10/2/7     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/8     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/9     BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/10    BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/11    BP3AD6SS      enabled      up           fixedX1 
    sfpPlus:1/10/2/12    BP3AD6SS      enabled      up           fixedX1 

    Modified: 2017-04-21