unit
Syntax
unit logical-unit-number {
accept-source-mac {
mac-address mac-address {
policer {
input cos-policer-name;
output cos-policer-name;
}
}
}
accounting-profile name;
advisory-options {
downstream-rate rate;
upstream-rate rate;
}
allow-any-vci;
atm-scheduler-map (map-name | default);
auto-configure {
agent-circuit-identifier {
dynamic-profile profile-name;
}
line-identity {
include {
accept-no-ids;
circuit-id;
remote-id;
}
dynamic-profile profile-name;
}
}
backup-options {
interface interface-name;
}
bandwidth rate;
cell-bundle-size cells;
clear-dont-fragment-bit;
compression {
rtp {
maximum-contexts number <force>;
f-max-period number;
queues [queue-numbers];
port {
minimum port-number;
maximum port-number;
}
}
}
compression-device interface-name;
copy-tos-to-outer-ip-header;
demux {
inet {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
inet6 {
address-source address;
auto-configure {
address-ranges {
authentication {
password password-string;
username-include {
auth-server-realm realm-string;
delimiter delimiter-character;
domain-name domain-name;
interface-name;
source-address;
user-prefix user-prefix-string;
}
}
dynamic-profile profile-name {
network ip-address {
range name {
low lower-limit;
high upper-limit;
}
}
}
}
}
}
}
demux-destination family;
demux-source family;
demux-options {
underlying-interface interface-name;
}
description text;
etree-ac-role (leaf | root);
interface {
l2tp-interface-id name;
(dedicated | shared);
}
dialer-options {
activation-delay seconds;
callback;
callback-wait-period time;
deactivation-delay seconds;
dial-string [dial-string-numbers];
idle-timeout seconds;
incoming-map {
caller caller-id | accept-all;
initial-route-check seconds;
load-interval seconds;
load-threshold percent;
pool pool-name;
redial-delay time;
watch-list {
[routes];
}
}
}
disable;
disable-mlppp-inner-ppp-pfc;
dlci dlci-identifier;
drop-timeout milliseconds;
dynamic-call-admission-control {
activation-priority priority;
bearer-bandwidth-limit kilobits-per-second;
}
encapsulation type;
epd-threshold cells plp1 cells;
family family-name {
... the family subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number] hierarchy ...
}
fragment-threshold bytes;
host-prefix-only;
inner-vlan-id-range start start-id end end-id;
input-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
vlan-id number;
}
interleave-fragments;
inverse-arp;
layer2-policer {
input-policer policer-name;
input-three-color policer-name;
output-policer policer-name;
output-three-color policer-name;
}
link-layer-overhead percent;
minimum-links number;
mrru bytes;
multicast-dlci dlci-identifier;
multicast-vci vpi-identifier.vci-identifier;
multilink-max-classes number;
multipoint;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
output-vlan-map {
(pop | pop-pop | pop-swap | push | push-push | swap |
swap-push | swap-swap);
inner-tag-protocol-id tpid;
inner-vlan-id number;
tag-protocol-id tpid;
}
passive-monitor-mode;
peer-unit unit-number;
plp-to-clp;
point-to-point;
ppp-options {
mru size;
mtu (size | use-lower-layer);
chap {
access-profile name;
default-chap-secret name;
local-name name;
passive;
}
compression {
acfc;
pfc;
}
dynamic-profile profile-name;
ipcp-suggest-dns-option;
lcp-restart-timer milliseconds;
loopback-clear-timer seconds;
ncp-restart-timer milliseconds;
pap {
access-profile name;
default-pap-password password;
local-name name;
local-password password;
passive;
}
}
pppoe-options {
access-concentrator name;
auto-reconnect seconds;
(client | server);
service-name name;
underlying-interface interface-name;
}
pppoe-underlying-options {
access-concentrator name;
direct-connect;
dynamic-profile profile-name;
max-sessions number;
}
proxy-arp;
service-domain (inside | outside);
shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);
queue-length number;
}
short-sequence;
targeted-distribution;
transmit-weight number;
(traps | no-traps);
trunk-bandwidth rate;
trunk-id number;
tunnel {
backup-destination address;
destination address;
key number;
routing-instance {
destination routing-instance-name;
}
source source-address;
ttl number;
}
vci vpi-identifier.vci-identifier;
vci-range start start-vci end end-vci;
vpi vpi-identifier;
vlan-id number;
vlan-id-range number-number;
vlan-tags inner tpid.vlan-id outer tpid.vlan-id;
family family {
accounting {
destination-class-usage;
source-class-usage {
(input | output | input output);
}
}
access-concentrator name;
address address {
... the address subhierarchy appears after the main [edit interfaces interface-name unit logical-unit-number family family-name] hierarchy ...
}
bundle interface-name;
core-facing;
demux-destination {
destination-prefix;
}
demux-source {
source-prefix;
}
direct-connect;
duplicate-protection;
dynamic-profile profile-name;
filter {
group filter-group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
interface-mode (access | trunk);
ipsec-sa sa-name;
keep-address-and-control;
mac-validate (loose | strict);
max-sessions number;
mtu bytes;
multicast-only;
no-redirects;
policer {
arp policer-template-name;
input policer-template-name;
output policer-template-name;
}
primary;
protocols [inet iso mpls];
proxy inet-address address;
receive-options-packets;
receive-ttl-exceeded;
remote (inet-address address | mac-address address);
rpf-check {
fail-filter filter-name
mode loose;
}
sampling {
input;
output;
}
service {
input {
post-service-filter filter-name;
service-set service-set-name <service-filter filter-name>;
}
output {
service-set service-set-name <service-filter filter-name>;
}
}
service-name-table table-name
targeted-options {
backup backup;
group group;
primary primary;
weight ($junos-interface-target-weight | weight-value);
}
(translate-discard-eligible | no-translate-discard-eligible);
(translate-fecn-and-becn | no-translate-fecn-and-becn);
translate-plp-control-word-de;
unnumbered-address interface-name destination address destination-profile profile-name;
vlan-id number;
vlan-id-list [number number-number];
address address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
destination address;
destination-profile name;
eui-64;
primary-only;
multipoint-destination address {
dlci dlci-identifier;
epd-threshold cells <plp1 cells>;
inverse-arp;
oam-liveness {
up-count cells;
down-count cells;
}
oam-period (disable | seconds);
shaping {
(cbr rate | rtvbr burst length peak rate sustained rate | vbr burst length peak rate sustained rate);
queue-length number;
}
vci vpi-identifier.vci-identifier;
}
preferred;
primary;
(vrrp-group | vrrp-inet6-group) group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
authentication-type authentication;
authentication-key key;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost number;
}
priority-hold-time seconds;
route ip-address/prefix-length routing-instance instance-name priority-cost cost;
}
virtual-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-interface interface-name;
active-group group-number;
}
}
}
}
}
Hierarchy Level
[edit interfaces interface-name], [edit logical-systems logical-system-name interfaces interface-name], [edit interfaces interface-set interface-set-name interface interface-name]
Description
Konfigurieren Sie eine logische Schnittstelle auf dem physischen Gerät. Sie müssen eine logische Schnittstelle konfigurieren, um das physische Gerät verwenden zu können.
Options
logical-unit-number— Anzahl der logischen Einheit.
Bereich: 0 bis 1.073.741.823 für demux-, PPPoE- und Pseudowire-statische Schnittstellen. 0 bis 16,385 für alle anderen statischen Schnittstellentypen.
etree-ac-role (leaf | root)— Eine Schnittstelle entweder als Leaf oder Root zu konfigurieren.
Die übrigen Aussagen sind separat erklärt. Suchen Sie in einem Explorer nach einer CLI, oder klicken Sie im Abschnitt Syntax auf eine verknüpfte Anweisung, um Details zu erhalten.
Required Privilege Level
Schnittstelle: Um diese Anweisung in der Konfiguration anzeigen zu können.
Interface Control: Um diese Anweisung zur Konfiguration hinzuzufügen.
Release Information
Statement eingeführt vor Junos OS Version 7.4.
Bereich für statische Pseudowire-Schnittstellen erhöht auf 1.073,741.823 in Junos OS Release 18.3R1.