transport
Syntax
transport {
accepted-prefix-limit {
drop-excess< limit-threshold>;
hide-excess< limit-threshold>;
maximum maximum;
teardown<idle-timeout(forever | timeout)>< limit-threshold>;
}
accept-srv6-service;
add-path {
receive;
send {
include-backup-path include-backup-path;
multipath;
path-count path-count;
path-selection-mode {
(all-paths | equal-cost-paths);
}
prefix-policy [ prefix-policy ... ];
}
}
advertise-srv6-service;
aggregate-label {
community community;
}
aigp {
disable;
}
damping;
defer-initial-multipath-build {
maximum-delay maximum-delay;
}
delay-route-advertisements {
always-wait-for-krt-drain;
maximum-delay {
route-age route-age;
routing-uptime routing-uptime;
}
minimum-delay {
inbound-convergence inbound-convergence;
routing-uptime routing-uptime;
}
}
extended-nexthop;
extended-nexthop-color;
extended-nexthop-tunnel;
graceful-restart {
forwarding-state-bit(from-fib | set);
long-lived {
extended-route-retention {
(disable | enable);
retention-policy [ retention-policy ... ];
retention-time retention-time;
}
restarter {
(disable | enable);
stale-time stale-time;
}
}
}
local-ipv4-address local-ipv4-address;
loops loops;
lu-export {
policy [ policy ... ];
}
nexthop-resolution {
no-resolution;
preserve-nexthop-hierarchy;
}
no-install;
output-queue-priority(expedited | priority priority);
per-group-label;
per-prefix-label;
prefix-limit {
drop-excess< limit-threshold>;
hide-excess< limit-threshold>;
maximum maximum;
teardown<idle-timeout(forever | timeout)>< limit-threshold>;
}
protection;
rib-group ribgroup-name
;
route-age-bgp-view;
route-refresh-priority(expedited | priority priority);
traffic-statistics {
file filename<files files>
<size size><(world-readable | no-world-readable)>;
interval interval;
labeled-path;
}
withdraw-priority(expedited | priority priority);
}Hierarchieebene
[edit fabric protocols bgp family inet6], [edit fabric protocols bgp group name family inet6], [edit fabric protocols bgp group name neighbor name family inet6], [edit logical-systems name protocols bgp family inet6], [edit logical-systems name protocols bgp group name family inet6], [edit logical-systems name protocols bgp group name neighbor name family inet6], [edit logical-systems name routing-instances name protocols bgp family inet6], [edit logical-systems name routing-instances name protocols bgp group name family inet6], [edit logical-systems name routing-instances name protocols bgp group name neighbor name family inet6], [edit logical-systems name tenants name routing-instances name protocols bgp family inet6], [edit logical-systems name tenants name routing-instances name protocols bgp group name family inet6], [edit logical-systems name tenants name routing-instances name protocols bgp group name neighbor name family inet6], [edit protocols bgp family inet6], [edit protocols bgp group name family inet6], [edit protocols bgp group name neighbor name family inet6], [edit routing-instances name protocols bgp family inet6], [edit routing-instances name protocols bgp group name family inet6], [edit routing-instances name protocols bgp group name neighbor name family inet6], [edit tenants name routing-instances name protocols bgp family inet6], [edit tenants name routing-instances name protocols bgp group name family inet6], [edit tenants name routing-instances name protocols bgp group name neighbor name family inet6]
Beschreibung
Aktivieren Sie Classful Transport (CT) NLRI für die inet6-Familie in BGP-Netzwerken.
Optionen
| accept-srv6-service |
Akzeptieren Sie den SRv6-Service. |
| advertise-srv6-service |
Stellen Sie den SRv6-Service vor. |
| aigp |
Zulassen des Sendens und Empfangens von AIGP-Attribut.
|
| damping |
Aktivieren Sie die Routenklappendämpfung. |
| extended-nexthop |
Erweiterte nexthop-Codierung. |
| extended-nexthop-color |
Lösen Sie mit erweitertem Farbton nexthop auf. |
| extended-nexthop-tunnel |
Verwenden Sie das BGP-Tunnel-Attribut. |
| local-ipv4-address |
Konfigurieren Sie eine lokale IPv4-Adresse. |
| nexthop-resolution |
Konfigurieren der Nexthop-Auflösungseigenschaften:
|
| no-install |
Installieren Sie empfangene Routen nicht bei der Weiterleitung. |
| per-group-label |
Stellen Sie Präfixe mit eindeutigen Labeln pro Gruppe an. |
| per-prefix-label |
Weisen Sie jedem angekündigten Präfix ein eindeutiges Label zu. |
| protection |
Datenverarbeitungs-Backup-Pfad für aktiven nexthop-Fehler. |
| route-age-bgp-view |
Halten Sie das Alter der BGP-Route nur basierend auf Aktualisierungsnachrichten aufrecht. |
Die übrigen Aussagen werden separat erläutert. Siehe CLI-Explorer.
Erforderliche Berechtigungsstufe
Routing: Diese Anweisung wird in der Konfiguration angezeigt.
routing-control: So fügen Sie diese Anweisung zur Konfiguration hinzu.
Versionsinformationen
Erklärung eingeführt in Junos OS Version 22.2R1.