dynamic-profiles
语法
dynamic-profiles {
profile-name {
class-of-service {
dynamic-class-of-service-options {
vendor-specific-tags tag;
}
interfaces {
interface-name ;
}
unit logical-unit-number {
classifiers {
type (classifier-name | default);
}
output-traffic-control-profile (profile-name | $junos-cos-traffic-control-profile);
report-ingress-shaping-rate bps;
rewrite-rules {
dscp (rewrite-name | default);
dscp-ipv6 (rewrite-name | default);
ieee-802.1 (rewrite-name | default) vlan-tag (outer | outer-and-inner);
inet-precedence (rewrite-name | default);
}
}
}
}
scheduler-maps {
map-name {
forwarding-class class-name scheduler scheduler-name;
}
}
schedulers {
(scheduler-name) {
buffer-size (seconds | percent percentage | remainder | temporal microseconds);
drop-profile-map loss-priority (any | low | medium-low | medium-high | high) protocol (any | non-tcp | tcp) drop-profile profile-name;
excess-priority (low | high | $junos-cos-scheduler-excess-priority);
excess-rate (percent percentage | percent $junos-cos-scheduler-excess-rate);
overhead-accounting (shaping-mode) <bytes (byte-value>;
priority priority-level;
shaping-rate (rate | predefined-variable);
transmit-rate (percent percentage | rate | remainder) <exact | rate-limit>;
}
}
traffic-control-profiles profile-name {
adjust-minimum rate;
delay-buffer-rate (percent percentage | rate);
excess-rate (percent percentage | proportion value | percent $junos-cos-excess-rate);
excess-rate-high (percent percentage | proportion value);
excess-rate-low (percent percentage | proportion value);
guaranteed-rate (percent percentage | rate) <burst-size bytes>;
max-burst-size cells;
overhead-accounting (frame-mode | cell-mode) <bytes byte-value>;
peak-rate rate;
scheduler-map map-name;
shaping-rate (percent percentage | rate | predefined-variable) <burst-size bytes>;
shaping-rate-excess-high (percent percentage | rate) <burst-size bytes>;
shaping-rate-excess-medium-high (percent percentage | rate) <burst-size bytes>;
shaping-rate-excess-medium-low (percent percentage | rate) <burst-size bytes>;
shaping-rate-excess-low (percent percentage | rate) <burst-size bytes>;
shaping-rate-priority-high (percent percentage | rate) <burst-size bytes>;
shaping-rate-priority-low (percent percentage | rate) <burst-size bytes>;
shaping-rate-priority-medium (percent percentage | rate) <burst-size bytes>;
shaping-rate-priority-medium-low (percent percentage | rate) <burst-size bytes>;
shaping-rate-priority-strict-high (percent percentage | rate) <burst-size bytes>;
sustained-rate rate;
}
}
firewall {
family family {
fast-update-filter filter-name {
interface-specific;
match-order [match-order];
term term-name {
from {
match-conditions;
}
then {
action;
action-modifiers;
}
only-at-create;
}
}
filter filter-name {
enhanced-mode-override;
instance-shared;
interface-shared;
interface-specific;
term term-name {
from {
match-conditions;
}
then {
action;
action-modifiers;
}
only-at-create;
filter filter-name {
interface-specific;
term term-name {
from {
match-conditions;
}
then {
action;
action-modifiers;
}
}
hierarchical-policer uid {
aggregate {
if-exceeding {
bandwidth-limit-limit bps;
burst-size-limit bytes;
}
then {
policer-action;
}
}
premium {
if-exceeding {
bandwidth-limit bps;
burst-size-limit bytes;
}
then {
policer-action;
}
}
}
policer uid {
filter-specific;
if-exceeding {
(bandwidth-limit bps | bandwidth-percent percentage);
burst-size-limit bytes;
}
logical-bandwidth-policer;
logical-interface-policer;
physical-interface-policer;
then {
policer-action;
}
}
three-color-policer uid {
action {
loss-priority high then discard;
}
logical-interface-policer;
single-rate {
(color-aware | color-blind);
committed-burst-size bytes;
committed-information-rate bps;
excess-burst-size bytes;
}
two-rate {
(color-aware | color-blind);
committed-burst-size bytes;
committed-information-rate bps;
peak-burst-size bytes;
peak-information-rate bps;
}
}
}
}
interfaces interface-name {
interface-set interface-set-name {
interface interface-name {
unit logical unit number {
advisory-options {
downstream-rate rate;
upstream-rate rate;
}
}
}
}
unit logical-unit-number {
actual-transit-statistics;
auto-configure {
agent-circuit-identifier {
dynamic-profile profile-name;
}
line-identity {
include {
accept-no-ids;
circuit-id;
remote-id;
}
dynamic-profile profile-name;
}
}
encapsulation (atm-ccc-cell-relay | atm-ccc-vc-mux | atm-cisco-nlpid | atm-tcc-vc-mux | atm-mlppp-llc | atm-nlpid | atm-ppp-llc | atm-ppp-vc-mux | atm-snap | atm-tcc-snap | atm-vc-mux | ether-over-atm-llc | ether-vpls-over-atm-llc | ether-vpls-over-fr | ether-vpls-over-ppp | ethernet | frame-relay-ccc | frame-relay-ppp | frame-relay-tcc | frame-relay-ether-type | frame-relay-ether-type-tcc | multilink-frame-relay-end-to-end | multilink-ppp | ppp-over-ether | ppp-over-ether-over-atm-llc | vlan-bridge | vlan-ccc | vlan-vci-ccc | vlan-tcc | vlan-vpls);
family family {
address address;
filter {
adf {
counter;
input-precedence precedence;
not-mandatory;
output-precedence precedence;
rule rule-value;
}
input filter-name (
precedence precedence;
shared-name filter-shared-name;
}
output filter-name {
precedence precedence;
shared-name filter-shared-name;
}
}
rpf-check {
fail-filter filter-name;
mode loose;
}
service {
input {
service-set service-set-name {
service-filter filter-name;
}
post-service-filter filter-name;
}
input-vlan-map {
inner-tag-protocol-id tpid;
inner-vlan-id number;
(push | swap);
tag-protocol-id tpid;
vlan-id number;
}
output {
service-set service-set-name {
service-filter filter-name;
}
}
output-vlan-map {
inner-tag-protocol-id tpid;
inner-vlan-id number;
(pop | swap);
tag-protocol-id tpid;
vlan-id number;
}
pcef pcef-profile-name {
activate rule-name | activate-all;
}
}
unnumbered-address interface-name <preferred-source-address address>;
}
filter {
input filter-name (
shared-name filter-shared-name;
}
output filter-name {
shared-name filter-shared-name;
}
}
host-prefix-only;
ppp-options {
aaa-options aaa-options-name;
authentication [ authentication-protocols ];
chap {
challenge-length minimum minimum-length maximum maximum-length;
local-name name;
}
ignore-magic-number-mismatch;
initiate-ncp (dual-stack-passive | ipv6 | ip)
ipcp-suggest-dns-option;
mru size;
mtu (size | use-lower-layer);
on-demand-ip-address;
pap;
peer-ip-address-optional;
local-authentication {
password password;
username-include {
circuit-id;
delimiter character;
domain-name name;
mac-address;
remote-id;
}
}
}
reassemble-packets;
targeted-options {
backup backup;
group group;
primary primary;
weight ($junos-interface-target-weight | weight-value);
}
telemetry {
subscriber-statistics;
queue-statistics {
interface $junos-interface-name {
refresh rate;
queues queue set;
}
interface-set $junos-interface-set-name {
refresh rate;
queues queue set;
}
}
}
vlan-id number;
vlan-tags outer [tpid].vlan-id [inner [tpid].vlan-id];
}
}
interfaces {
demux0 {...}
}
interfaces {
pp0 {...}
}
policy-options {
prefix-list uid {
ip-addresses;
dynamic-db;
}
}
predefined-variable-defaults predefined-variable <variable-option> default-value;
profile-type remote-device-service;
protocols {
igmp {
interface interface-name {
accounting;
disable;
group-limit limit;
group-policy;
group-threshold value;
immediate-leave
log-interval seconds;
no-accounting;
oif-map;
passive;
promiscuous-mode;
ssm-map ssm-map-name;
ssm-map-policy ssm-map-policy-name
static {
group group {
source source;
}
}
version version;
}
}
mld {
interface interface-name {
(accounting | no-accounting);
disable;
group-limit limit;
group-policy;
group-threshold value;
immediate-leave;
log-interval seconds;
oif-map;
passive;
ssm-map ssm-map-name;
ssm-map-policy ssm-map-policy-name;
static {
group multicast-group-address {
exclude;
group-count number;
group-increment increment;
source ip-address {
source-count number;
source-increment increment;
}
}
}
version version;
}
}
router-advertisement {
interface interface-name {
current-hop-limit number;
default-lifetime seconds;
dns-server-address
(managed-configuration | no-managed-configuration);
max-advertisement-interval seconds;
min-advertisement-interval seconds;
(other-stateful-configuration | no-other-stateful-configuration);
prefixprefix {
(autonomous | no-autonomous);
(on-link | no-on-link);
preferred-lifetime seconds;
valid-lifetime seconds;
}
reachable-time milliseconds;
retransmit-timer milliseconds;
}
}
}
routing-instances routing-instance-name {
interface interface-name;
routing-options {
access {
route prefix {
next-hop next-hop;
metric route-cost;
preference route-distance;
tag route-tag;
tag2 route-tag2;
}
}
access-internal {
route subscriber-ip-address {
qualified-next-hop underlying-interface {
mac-address address;
}
}
}
multicast {
interface interface-name {
no-qos-adjust;
}
}
}
rib routing-table-name {
access {
route prefix {
next-hop next-hop;
metric route-cost;
preference route-distance;
tag route-tag;
tag2 route-tag2;
}
}
access-internal {
route subscriber-ip-address {
qualified-next-hop underlying-interface {
mac-address address;
}
}
}
}
}
routing-options {
access {
route prefix {
next-hop next-hop;
metric route-cost;
preference route-distance;
tag route-tag;
tag2 route-tag2;
}
}
access-internal {
route subscriber-ip-address {
qualified-next-hop underlying-interface {
mac-address address;
}
}
}
multicast {
interface interface-name {
no-qos-adjust;
}
}
}
services {
captive-portal-content-delivery {
auto-deactivate value;
rule name {
match-direction (input | input-output | output);
term name {
then {
accept;
redirect url;
rewrite destination-address address <destination-port port-number>;
syslog;
}
}
}
}
}
variables {
variable-name {
default-value default-value;
equals expression;
mandatory;
uid;
uid-reference;
}
}
version-alias profile-alias-string;
}
}
层次结构级别
[edit]
描述
创建动态配置文件，以用于 DHCP 或 PPP 客户端访问。
选项
| profile-name | 动态配置文件的名称;字符串，最多可包含 80 个字母数字字符。 |
| reassemble-packets | （可选）支持对通过软 GRE 隧道从 Wi-Fi 接入点传输至 BNG 上的 Wi-Fi 接入网关的分片 GRE 数据包进行 IPv4 重组。大小从 256 字节到 8192 字节的分片支持重装。
注意：
|
其余语句将单独解释。在 CLI Explorer 中 搜索语句，或单击语法部分中的链接语句，查看详细信息。
必需的权限级别
路由 — 在配置中查看此语句。
路由控制 — 将此语句添加到配置中。
版本信息
在 Junos OS 9.2 版中引入的语句。
filter, policer, hierarchical-policer, three-color-policer, and policy options Junos OS 11.4 版中引入的层级支持。