示例：在 MBGP MVPN 中配置冗余虚拟隧道接口
此示例说明如何在多协议 BGP （MBGP） 组播 VPN （MVPN） 中配置冗余虚拟隧道 （VT） 接口。要进行配置，请在路由实例中包含多个 VT 接口，并选择性地将 primary 语句应用于其中一个 VT 接口。
要求
配置了冗余 VT 接口的路由设备必须运行 Junos OS 12.3 或更高版本。
概述
配置
程序
CLI 快速配置
要快速配置此示例，请复制以下命令，将其粘贴到文本文件中，删除所有换行符，更改与您的网络配置匹配所需的任何详细信息，然后将命令复制并粘贴到层次结构级别的 CLI [edit] 中。
设备 CE1
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.1/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.1/24 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.1
设备 CE2
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.18/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.6/24 set protocols sap listen 192.168.0.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.6
设备 CE3
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.22/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.7/24 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.7
设备 P
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.6/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.9/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.3/24 set protocols mpls interface ge-1/2/0.0 set protocols mpls interface ge-1/2/1.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp interface ge-1/2/1.0 set protocols ldp p2mp set routing-options router-id 192.0.2.3
设备 PE1
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.2/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.5/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/2/0 unit 2 family inet set interfaces lo0 unit 0 family inet address 192.0.2.2/24 set interfaces lo0 unit 1 family inet address 198.51.100.0/24 set protocols mpls interface ge-1/2/1.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.2 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.4 set protocols bgp group ibgp neighbor 192.0.2.5 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set protocols ldp interface ge-1/2/1.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface ge-1/2/0.0 set routing-instances vpn-1 interface vt-1/2/0.2 multicast set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 provider-tunnel ldp-p2mp set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/0.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.2 set routing-options autonomous-system 1001
设备 PE2
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.10/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/2 unit 0 family inet address 10.1.1.13/30 set interfaces ge-1/2/2 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.17/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/1/0 unit 0 family inet set interfaces vt-1/2/1 unit 0 family inet set interfaces lo0 unit 0 family inet address 192.0.2.4/24 set interfaces lo0 unit 1 family inet address 203.0.113.4/24 set protocols mpls interface ge-1/2/0.0 set protocols mpls interface ge-1/2/2.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.4 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.2 set protocols bgp group ibgp neighbor 192.0.2.5 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ospf area 0.0.0.0 interface ge-1/2/2.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp interface ge-1/2/2.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface vt-1/1/0.0 multicast set routing-instances vpn-1 interface vt-1/1/0.0 primary set routing-instances vpn-1 interface vt-1/2/1.0 multicast set routing-instances vpn-1 interface ge-1/2/1.0 set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/1.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.4 set routing-options autonomous-system 1001
设备 PE3
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.14/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.21/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/2/0 unit 5 family inet set interfaces lo0 unit 0 family inet address 192.0.2.5/24 set interfaces lo0 unit 1 family inet address 203.0.113.5/24 set protocols mpls interface ge-1/2/0.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.5 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.2 set protocols bgp group ibgp neighbor 192.0.2.4 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface vt-1/2/0.5 multicast set routing-instances vpn-1 interface ge-1/2/1.0 set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/1.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.5 set routing-options autonomous-system 1001
分步过程
以下示例要求您在配置层次结构中导航各个级别。有关导航 CLI 的信息，请参阅 CLI 用户指南中的在配置模式下使用 CLI 编辑器。
要在 MBGP MVPN 中配置冗余 VT 接口，请执行以下操作：
配置物理接口和环路接口。
[edit interfaces] user@PE2# set ge-1/2/0 unit 0 family inet address 10.1.1.10/30 user@PE2# set ge-1/2/0 unit 0 family mpls user@PE2# set ge-1/2/2 unit 0 family inet address 10.1.1.13/30 user@PE2# set ge-1/2/2 unit 0 family mpls user@PE2# set ge-1/2/1 unit 0 family inet address 10.1.1.17/30 user@PE2# set ge-1/2/1 unit 0 family mpls user@PE2# set lo0 unit 0 family inet address 192.0.2.4/24 user@PE2# set lo0 unit 1 family inet address 203.0.113.4/24
配置 VT 接口。
每个 VT 接口都可以在一个路由实例下进行配置。
[edit interfaces] user@PE2# set vt-1/1/0 unit 0 family inet user@PE2# set vt-1/2/1 unit 0 family inet
在物理接口上配置 MPLS。
[edit protocols mpls] user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0
配置 BGP。
[edit protocols bgp group ibgp] user@PE2# set type internal user@PE2# set local-address 192.0.2.4 user@PE2# set family inet-vpn any user@PE2# set family inet-mvpn signaling user@PE2# set neighbor 192.0.2.2 user@PE2# set neighbor 192.0.2.5
配置内部网关协议。
[edit protocols ospf area 0.0.0.0] user@PE2# set interface lo0.0 passive user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0
配置 LDP。
[edit protocols ldp] user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0 user@PE2# set p2mp
配置路由策略。
[edit policy-options policy-statement parent_vpn_routes] user@PE2# set from protocol bgp user@PE2# set then accept
配置路由实例。
[edit routing-instances vpn-1] user@PE2# set instance-type vrf user@PE2# set interface ge-1/2/1.0 user@PE2# set interface lo0.1 user@PE2# set route-distinguisher 100:100 user@PE2# set vrf-target target:1:1 user@PE2# set protocols ospf export parent_vpn_routes user@PE2# set protocols ospf area 0.0.0.0 interface lo0.1 passive user@PE2# set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 user@PE2# set protocols pim rp static address 198.51.100.0 user@PE2# set protocols pim interface ge-1/2/1.0 mode sparse user@PE2# set protocols mvpn
在路由实例中配置冗余 VT 接口。
将 vt-1/1/0.0 设为主接口。
[edit routing-instances vpn-1] user@PE2# set interface vt-1/1/0.0 multicast primary user@PE2# set interface vt-1/2/1.0 multicast
配置路由器 ID 和自治系统 （AS） 编号。
[edit routing-options] user@PE2# set router-id 192.0.2.4 user@PE2# set autonomous-system 1001
结果
在配置模式下，输入 show interfaces、 show protocols、 show routing-instancesshow policy-options和show routing-options命令来确认您的配置。如果输出未显示预期的配置，请重复此示例中的配置说明以进行更正。
user@PE2# show interfaces
ge-1/2/0 {
unit 0 {
family inet {
address 10.1.1.10/30;
}
family mpls;
}
}
ge-1/2/2 {
unit 0 {
family inet {
address 10.1.1.13/30;
}
family mpls;
}
}
ge-1/2/1 {
unit 0 {
family inet {
address 10.1.1.17/30;
}
family mpls;
}
}
vt-1/1/0 {
unit 0 {
family inet;
}
}
vt-1/2/1 {
unit 0 {
family inet;
}
}
lo0 {
unit 0 {
family inet {
address 192.0.2.4/24;
}
}
unit 1 {
family inet {
address 203.0.113.4/24;
}
}
}
user@PE2# show protocols
mpls {
interface ge-1/2/0.0;
interface ge-1/2/2.0;
}
bgp {
group ibgp {
type internal;
local-address 192.0.2.4;
family inet-vpn {
any;
}
family inet-mvpn {
signaling;
}
neighbor 192.0.2.2;
neighbor 192.0.2.5;
}
}
ospf {
area 0.0.0.0 {
interface lo0.0 {
passive;
}
interface ge-1/2/0.0;
interface ge-1/2/2.0;
}
}
ldp {
interface ge-1/2/0.0;
interface ge-1/2/2.0;
p2mp;
}
user@PE2# show policy-options
policy-statement parent_vpn_routes {
from protocol bgp;
then accept;
}
user@PE2# show routing-instances
vpn-1 {
instance-type vrf;
interface vt-1/1/0.0 {
multicast;
primary;
}
interface vt-1/2/1.0 {
multicast;
}
interface ge-1/2/1.0;
interface lo0.1;
route-distinguisher 100:100;
vrf-target target:1:1;
protocols {
ospf {
export parent_vpn_routes;
area 0.0.0.0 {
interface lo0.1 {
passive;
}
interface ge-1/2/1.0;
}
}
pim {
rp {
static {
address 198.51.100.0;
}
}
interface ge-1/2/1.0 {
mode sparse;
}
}
mvpn;
}
}
user@PE2# show routing-options router-id 192.0.2.4; autonomous-system 1001;
如果完成设备配置，请从配置模式输入 commit 。
验证
确认配置工作正常。
注意：
当组播流量通过 VPN 传输时，该 show multicast route extensive instance instance-name 命令还会在组播转发表中显示 VT 接口。
检查 LSP 路由
目的
验证预期的 LT 接口是否已分配给 LDP 获知路由。
行动
在操作模式下，输入 show route table mpls 命令。
user@PE2> show route table mpls mpls.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:09:36, metric 1 Receive 1 *[MPLS/0] 02:09:36, metric 1 Receive 2 *[MPLS/0] 02:09:36, metric 1 Receive 13 *[MPLS/0] 02:09:36, metric 1 Receive 299776 *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299776(S=0) *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299792 *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299792(S=0) *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299808 *[LDP/9] 02:09:04, metric 1 > via ge-1/2/0.0, Swap 299808 299824 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299840 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299856 *[VPN/170] 02:08:56 receive table vpn-1.inet.0, Pop 299872 *[LDP/9] 02:08:54, metric 1 > via vt-1/1/0.0, Pop via ge-1/2/2.0, Swap 299872在配置模式下，通过从 vt-1/1/0.0 接口中删除
primary语句并将其添加到 vt-1/2/1.0 接口来更改主 VT 接口。[edit routing-instances vpn-1] user@PE2# delete interface vt-1/1/0.0 primary user@PE2# set interface vt-1/2/1.0 primary user@PE2# commit
在操作模式下，输入 show route table mpls 命令。
user@PE2> show route table mpls mpls.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:09:36, metric 1 Receive 1 *[MPLS/0] 02:09:36, metric 1 Receive 2 *[MPLS/0] 02:09:36, metric 1 Receive 13 *[MPLS/0] 02:09:36, metric 1 Receive 299776 *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299776(S=0) *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299792 *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299792(S=0) *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299808 *[LDP/9] 02:09:04, metric 1 > via ge-1/2/0.0, Swap 299808 299824 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299840 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299856 *[VPN/170] 02:08:56 receive table vpn-1.inet.0, Pop 299872 *[LDP/9] 02:08:54, metric 1 > via vt-1/2/1.0, Pop via ge-1/2/2.0, Swap 299872
意义
使用原始配置时，输出显示 vt-1/1/0.0 接口。如果将主接口更改为 vt-1/2/1.0，则输出将显示 vt-1/2/1.0 接口。