在网桥网络上配置中继接口
在 MX 系列路由器上，您可以在网桥网络上配置中继接口。
以下输出示例显示了网桥网络上的中继端口配置：
user@host# run show interfaces
ge-0/0/0 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 1;
}
}
ge-2/0/0 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 1-200;
}
}
}
ge-2/0/1 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 1;
}
}
如果要 igmp-snooping 在桥接域中正常运行，则不应为该桥接域配置 interface-mode 和 irb 配置。此类配置提交成功，但 IGMP 侦听不起作用，并且会显示一条通知相同的消息，如以下示例配置后所示：
user@host# run show configuration
interfaces {
ge-5/1/1 {
flexible-vlan-tagging;
native-vlan-id 1;
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 401;
}
}
}
irb {
unit 401 {
family inet {
address 192.168.2.2/27;
}
}
}
}
protocols {
igmp {
interface all;
}
}
bridge-domains {
VLAN-401 {
vlan-id 401;
routing-interface irb.401;
protocols {
igmp-snooping;
}
}
}
user@host# commit
[edit bridge-domains]
'VLAN-401'
IGMP Snooping not supported with IRB and trunk mode interface ge-5/1/1.0
commit complete
要实现桥接域的 IGMP 侦听，应使用以下示例中所示的此类配置：
user@host# run show configuration
interfaces {
ge-0/0/1 {
flexible-vlan-tagging;
native-vlan-id 1;
encapsulation flexible-ethernet-services;
unit 0 {
encapsulation vlan-bridge;
vlan-id 401;
}
}
irb {
unit 401 {
family inet {
address 192.168.2.2/27;
}
}
}
}
protocols {
igmp {
interface all;
}
}
bridge-domains {
VLAN-401 {
vlan-id 401;
interface ge-0/0/1.0;
routing-interface irb.401;
protocols {
igmp-snooping;
}
}
}
user@host# commit
commit complete