oam (Protocols MPLS)
语法
oam {
bfd-liveness-detection{
failure-action teardown;
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
minimum-transmit-interval milliseconds;
multiplier detection-time-multiplier;
}
lsp-ping-interval seconds;
mpls-tp-mode;
performance-monitoring {
querier {
loss {
traffic-class tc-value {
query-interval milliseconds;
measurement-quantity bytes|packets;
average-sample-size sample size;
loss-threshold loss threshold value;
loss-threshold-window number of samples for loss threshold;
}
}
delay {
traffic-class tc-value {
query-interval milliseconds;
padding-size size;
average-sample-size sample size;
rtt-delay-threshold rtt threshold value;
twcd-delay-threshold twcd threshold value;
}
}
loss-delay {
traffic-class tc-value {
query-interval milliseconds;
measurement-quantity bytes|packets;
padding-size size;
average-sample-size sample size;
loss-threshold loss threshold value;
loss-threshold-window number of samples for loss threshold;
rtt-delay-threshold rtt threshold value;
twcd-delay-threshold twcd threshold value;
}
}
}
responder {
loss {
min-query-interval milliseconds;
}
delay {
min-query-interval milliseconds;
}
}
}
}
层次结构级别
[edit protocols mpls], [edit protocols mpls label-switched-path lsp-name] [edit protocols mpls label-switched-path lsp-name primary path-name]
说明
为 RSVP 信号 LSP 启用操作、管理和维护 （OAM）。
选项
lsp-ping-interval seconds- 指定 LSP ping 间隔的持续时间（以秒为单位）。要对 RSVP 信号的 LSP 发出 ping，请使用 ping mpls rsvp 命令。
其余语句将单独解释。请参阅 CLI 浏览器。
必需的权限级别
路由 — 在配置中查看此语句。
路由控制 — 将此语句添加到配置中。
发布信息
在 Junos OS 7.6 版中引入的语句。
lsp-ping-interval Junos OS 9.4 版中引入的选项。
performance-monitoring 在 Junos OS 15.1 版中引入的配置语句。