串行选项
语法
serial-options {
clock-rate rate;
clocking-mode (dce | loop);
control-polarity (negative | positive);
cts-polarity (negative | positive);
dcd-polarity (negative | positive);
dce-options {
control-signal (assert | de-assert | normal);
cts (ignore | normal | require);
dcd (ignore | normal | require);
dsr (ignore | normal | require);
dtr signal-handling-option;
ignore-all;
indication (ignore | normal | require);
rts (assert | de-assert | normal);
tm (ignore | normal | require);
}
dsr-polarity (negative | positive);
dte-options {
control-signal (assert | de-assert | normal);
cts (ignore | normal | require);
dcd (ignore | normal | require);
dsr (ignore | normal | require);
dtr signal-handling-option;
ignore-all;
indication (ignore | normal | require);
rts (assert | de-assert | normal);
tm (ignore | normal | require);
}
dtr-circuit (balanced | unbalanced);
dtr-polarity (negative | positive);
encoding (nrz | nrzi);
indication-polarity (negative | positive);
line-protocol protocol;
loopback (dce-local | dce-remote | local | remote);
rts-polarity (negative | positive);
tm-polarity (negative | positive);
transmit-clock invert;
}
层次结构级别
[edit interfaces se-pim/0/port]
所需的权限级别
接口- 要查看配置中的此语句。
接口控制 - 要将此语句添加至配置中。
发布信息
在 Junos OS 版本7.4 之前引入的语句。