family
语法
family {
ethernet-switching {
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members (vlan-name |[-vlan-names] | all);
}
}
fibre-channel {
port-mode (f-port | np-port);
}
inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
preferred;
primary;
vrrp-group group-number {
(accept-data | no-accept-data);
advertise–interval seconds;
advertisements-threshold number;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
priority-cost number;
}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-address [addresses];
vrrp-inherit-from {
active-group group-number;
active-interface interface-name;
}
}
}
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
no-neighbor-learn;
no-redirects;
primary;
rpf-check {
fail-filter filter-name;
mode {
loose;
}
}
}
inet6 {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address address {
eui-64;
ndp ip-address (mac | multicast-mac) mac-address <publish>;
preferred;
primary;
vrrp-inet6-group group-id {
accept-data | no-accept-data;
advertisements-threshold number;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
inet6-advertise-interval milliseconds;
preempt | no-preempt {
hold-time seconds;
}
priority number;
track {
interface interface-name {
priority-cost number;
}
priority-hold-time seconds;
route ip-address/mask routing-instance instance-name priority-cost cost;
}
virtual-inet6-address [addresses];
virtual-link-local-address ipv6–address;
vrrp-inherit-from {
active-group group-name;
active-interface interface-name;
}
}
}
(dad-disable | no-dad-disable);
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
nd6-stale-time time;
no-neighbor-learn;
no-redirects;
policer {
input policer-name;
output policer-name;
}
rpf-check {
fail-filter filter-name;
mode {
loose;
}
}
mpls {
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
mtu bytes;
}
}
}
层次结构级别
[edit interfaces interface-name unit logical-unit-number], [edit interfaces interface-range interface-name unit logical-unit-number family]
描述
为 QFX 系列交换机上的逻辑接口配置协议家族信息。
默认
默认情况下，QFX 系列上的接入接口设置为 系列以太网交换 。如果要更改接口的家族设置，可能必须先删除此默认设置或任何用户配置的家族设置。
您必须配置逻辑接口才能使用物理设备。
选项
交换机上的接口类型包括：
聚合以太网 （ae）
千兆以太网 （ge）
环路 （lo0）
管理以太网 （me0）
-
路由 VLAN 接口 （RVI） （VLAN）
10 千兆以太网 （xe）
并非所有接口类型都支持所有 家族 子语句。检查交换机 CLI 中是否有特定协议家族配置支持的子语句。
所需权限级别
接口 — 在配置中查看此语句。接口控制 — 将此语句添加到配置中。
发布信息
Junos OS 11.1 版中引入的语句。