show interfaces interface-set (Ethernet Interface Set)
语法
show interfaces interface-set interface-set-name <detail | terse>
描述
显示有关指定千兆位或 10 千兆以太网接口集的信息。
您还可以使用该 show interfaces interface-set
命令显示有关代理电路标识符 (ACI) 接口集的信息。
选项
interface-set interface-set-name |
显示有关指定千兆以太网、10 千兆以太网、ACI 或 ALI 接口集的信息。 |
detail | terse |
(可选)显示指定的输出级别。 |
所需权限级别
视图
输出字段
命令的信息show interfaces interface-set
如表 1 所示。输出字段按其出现的大致顺序列出。
字段名称 |
字段说明 |
输出级别 |
---|---|---|
物理接口 | ||
|
接口集的名称。 对于 ACI 接口集,接口集名称以 为前缀 对于 ALI 接口集,接口集名称以接口集所基于的可信选项为前缀:
|
所有级别 |
|
接口集的索引号。 |
|
|
对于 ACI 接口集,在 DHCP 或 PPPoE 中接收的字符串控制数据包,用于唯一标识订阅者的接入节点和接入节点上的 DSL 线路。只有 可用于
注意:
当用自动配置部分配置 |
|
|
对于 ALI 接口集,DHCP 或 PPPoE 控制数据包中接收的可信选项可唯一标识用户的接入节点和接入节点上的 DSL 线路。受信任选项可以是以下一项或两项:
注意:
当“仅”
注意:
当用自动配置部分配置 |
|
|
路由器使用 ACI 或 ALI 接口集创建的动态 PPPoE 用户接口。 |
|
|
对于动态 PPPoE 订阅者接口,可在底层接口上激活的最大 PPPoE 逻辑接口数。 |
|
|
对于动态 PPPoE 用户接口,路由器是否配置为忽略(清除)RADIUS 在瞻博网络 VSA [26-143] 中返回的 PPPoE 最大会话值,并将底层接口上的 PPPoE 最大会话值恢复为使用 |
|
|
指定接口集上接收和传输的字节和数据包的数量和速率。
|
|
|
指定接口集支持的出口队列总数。 |
|
|
指定接口集上使用的出口队列总数。 |
|
|
|
|
|
所有接口集的列表,或者对于 ACI 接口集,属于指定 ACI 接口集的所有订阅者接口的列表。 |
|
示例输出
- show interfaces interface-set tese
- 显示接口接口集详细信息
- show interfaces interface-set(基于 ACI 的 ACI 接口集)
- show interfaces interface-set(基于 ACI 可信选项的 ACI 接口集)
- show interfaces interface-set(基于 ARI 可信选项的 ACI 接口集)
- show interfaces interface-set(当同时收到 ACI 和 ARI 时,基于 ARI 可信选项设置 ACI 接口集)
- show interfaces interface-set(当既未收到 ACI 也没有收到 ARI 时,基于“接受无 ID”可信选项的 ACI 接口集)
- show interfaces interface-set(L2BSA 和 PPPoE 订阅者)
show interfaces interface-set tese
user@host> show interfaces interface-set terse Interface set: iflset-xe-11/3/0-0 ge-1/0/1-0 ge-1/0/1-2
显示接口接口集详细信息
user@host> show interfaces interface-set iflset-xe-11/3/0-0 detail Interface set: iflset-xe-11/3/0-0 Interface set index: 19 Traffic statistics: Output bytes : 751017840 401673504 bps Output packets: 11044380 738377 pps Egress queues: 4 supported, 4 in use Queue counters: Queued packets Transmitted packets Dropped packets 0 211091327 11044380 199995746 1 0 0 0 2 0 0 0 3 0 0 0 Members: xe-11/3/0.0
show interfaces interface-set(基于 ACI 的 ACI 接口集)
user@host> show interfaces interface-set Interface set: aci-1001-ge-5/2/0.10 Interface set index: 1 Interface set snmp index: 67108865 ACI VLAN: Agent Circuit ID: circuit0 PPPoE: Max Sessions: 32000, Max Sessions VSA Ignore: Off Members: demux0.3221225472
show interfaces interface-set(基于 ACI 可信选项的 ACI 接口集)
user@host> show interfaces interface-set Interface set: ari-1002-demux0.3221225473 Interface set index: 2 Interface set snmp index: 67108866 Line Identity: Agent Circuit ID: remote20 PPPoE: Max Sessions: 32000, Max Sessions VSA Ignore: Off Members: demux0.3221225474
show interfaces interface-set(基于 ARI 可信选项的 ACI 接口集)
user@host> show interfaces interface-set Interface set: aci-1002-demux0.3221225473 Interface set index: 2 Interface set snmp index: 67108866 Line Identity: Agent Remote ID: remote20 PPPoE: Max Sessions: 32000, Max Sessions VSA Ignore: Off Members: demux0.3221225474
show interfaces interface-set(当同时收到 ACI 和 ARI 时,基于 ARI 可信选项设置 ACI 接口集)
user@host> show interfaces interface-set Interface set: ari-1002-demux0.3221225473 Interface set index: 2 Interface set snmp index: 67108866 Line Identity: Agent Remote ID: remote20 PPPoE: Max Sessions: 32000, Max Sessions VSA Ignore: Off Members: demux0.3221225474
show interfaces interface-set(当既未收到 ACI 也没有收到 ARI 时,基于“接受无 ID”可信选项的 ACI 接口集)
user@host> show interfaces interface-set Interface set: noids-1002-demux0.3221225473 Interface set index: 2 Interface set snmp index: 67108866 Members: demux0.3221225474
show interfaces interface-set(L2BSA 和 PPPoE 订阅者)
user@host> show interfaces interface-set Interface set: ge-1/0/4 Interface set index: 6 Members: ge-1/0/4.1073741908 pp0.1073741907
发布信息
在 Junos OS 8.5 版中引入的命令。