show chassis cluster information configuration-synchronization
语法
show chassis cluster information configuration-synchronization
描述
显示机箱群集消息。这些消息指示冗余模式、自动同步状态以及设备上是否启用了自动同步。
所需权限级别
视图
输出字段
表 1 列出了命令 show chassis cluster information configuration-synchronization 的输出字段。输出字段按其出现的大致顺序列出。
字段名称 |
字段说明 |
|---|---|
|
机箱群集 |
|
|
|
事件的时间戳、自动配置同步状态和同步尝试次数。 |
示例输出
显示机箱群集信息配置-同步
user@host> show chassis cluster information configuration-synchronization node0: -------------------------------------------------------------------------- Configuration Synchronization: Status: Activation status: Enabled Last sync operation: Auto-Sync Last sync result: Not needed Last sync mgd messages: Events: Feb 25 22:21:49.174 : Auto-Sync: Not needed node1: -------------------------------------------------------------------------- Configuration Synchronization: Status: Activation status: Enabled Last sync operation: Auto-Sync Last sync result: Succeeded Last sync mgd messages: mgd: rcp: /config/juniper.conf: No such file or directory Network security daemon: warning: You have enabled/disabled inet6 flow. Network security daemon: You must reboot the system for your change to take effect. Network security daemon: If you have deployed a cluster, be sure to reboot all nodes. mgd: commit complete Events: Feb 25 23:02:33.467 : Auto-Sync: In progress. Attempt: 1 Feb 25 23:03:13.200 : Auto-Sync: Succeeded. Attempt: 1
发布信息
在 Junos OS 12.1X47-D10 版中引入的命令。