interfaces (QFX Series, ACX Series)
Sintaxe
As declarações a seguir e seus subestações associados não são suportados em switches da Série OCX: auto-negotiation, , speed, ethernet-switching, fcoe-lagfibre-channel, fibrechannel-options, mc-ae, vlan, , vlan-ide vlan-tagging.
interfaces {
aex {
disable;
aggregated-ether-options {
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(fcoe-lag | no-fcoe-lag);
flexible-vlan-tagging;
(flow-control | no-flow-control);
lacp mode {
admin-key key;
force-up;
periodic interval;
system-id mac-address;
}
link-speed speed;
local-bias;
loopback;
no-loopback;
minimum-links number;
}
mc-ae {
chassis-id chassis-id;
mc-ae-id mc-ae-id;
mode (active-active);
status-control (active | standby);
}
description text;
gratuitous-arp-reply | no-gratuitous-arp-reply)
hold-time down milliseconds up milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
interface-range {
powersaving {
member-range starting-interface-name to ending-interface-name;
unused;
}
interface-range-name {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
}
}
(auto-negotiation| no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
(flow-control | no-flow-control);
link-mode mode;
speed (auto-negotiation | speed);
}
hold-time milliseconds down milliseconds;
member interface-name;
member-range starting-interface-name to ending-interface-name;
unused;
mtu bytes;
unit logical-unit-number {
disable;
description text;
family family-name {...}
(traps | no traps);
vlan-id vlan-id-number;
}
}
lo0 {
disable;
description text;
hold-time milliseconds down milliseconds;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
mex {
disable;
description text;
hold-time milliseconds down milliseconds;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
no-gratuitous-arp-request;
traceoptions;
traps;
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
}
traps;
vlan-id vlan-id-number;
}
vlan-tagging;
vlan {
disable;
description text;
(gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
}
}
fc-0/0/port {
fibrechannel-options {
bb-sc-n;
(loopback | no-loopback);
speed (auto-negotiation | 2g | 4g | 8g);
}
unit logical-unit-number {
disable;
description text;
family {
fibre-channel {
port-mode np-port;
}
(traps | no traps);
}
ge-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
primary;
}
}
(auto-negotiation | no-auto-negotiation);
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
link-mode mode;
loopback;
no-loopback;
speed (auto-negotiation | speed);
}
gratuitous-arp-reply| no-gratuitous-arp-reply);
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
description text;
disable;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
vrrp-group group-id {
(accept-data | no-accept-data);
advertise-interval seconds;
authentication-key key;
authentication-type authentication;
fast-interval milliseconds;
(preempt | no-preempt) {
hold-time seconds;
}
priority number;
track {
interface interface-name {
bandwidth-threshold bits-per-second priority-cost priority;
priority-cost priority;
}
priority-hold-time seconds;
route prefix/prefix-length routing-instance instance-name priority-cost priority;
}
}
virtual-address [ addresses ];
}
xe-0/0/port {
disable;
description text;
ether-options {
802.3ad aex {
lacp {
force-up;
(primary | backup);
}
}
configured-flow-control {
rx-buffers (on | off);
tx-buffers (on | off);
}
flexible-vlan-tagging;
(flow-control | no-flow-control);
loopback;
no-loopback;
}
(gratuitous-arp-reply| no-gratuitous-arp-reply
hold-time milliseconds down milliseconds;
mac
mtu bytes;
no-gratuitous-arp-request;
traceoptions;
(traps | no traps);
unit logical-unit-number {
disable;
description text;
family {
ethernet-switching {
filter input filter-name;
filter output filter-name;
native-vlan-id vlan-id;
port-mode mode;
reflective-relay;
vlan {
members [ (all | names | vlan-ids) ];
}
}
fibre-channel {
port-mode (f-port | np-port);
}
inet {
address address {
primary;
}
filter input filter-name;
filter output filter-name;
primary;
targeted-broadcast;
}
(traps | no traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
}
Nível de hierarquia
[edit]
Descrição
Configure as interfaces nas Séries QFX, Série ACX e Série OCX.
As seguintes declarações e seus subestações associados não são suportados em switches da Série OCX: auto-negotiation, , fibrechannel-optionsfibre-channelspeedfcoe-lagmc-aeethernet-switching, e vlanvlan-idvlan-tagging
A maioria das declarações de configuração do Junos OS padrão estão disponíveis no Junos OS para um switch. Este tópico lista as declarações do Junos OS que você costuma usar ao configurar um switch, bem como declarações adicionadas apenas aos switches de suporte.
Veja o Feature Explorer para saber as plataformas de suporte para o recurso de poweraving.
Opções
Aex— Configure uma interface Ethernet agregada.
xe-0/0/port/— Configure uma interface Ethernet de 10 Gigabits.
ge-0/0/port/— Configure uma interface Ethernet Gigabit.
fc-0/0//port— Configure uma interface fibre channel.
meX/— Configure uma interface de gerenciamento.
mc-ae — Configure uma interface Ethernet agregada (MC-AE) multichassis.
As declarações restantes são explicadas separadamente. Consulte o CLI Explorer.
Nível de privilégio necessário
interface — Para visualizar essa declaração na configuração.
controle de interface — para adicionar essa declaração à configuração.
Informações de lançamento
Declaração introduzida no Junos OS Release 11.1.
Suporte de declaração para a série QFX introduzida no Junos OS EVO Release 21.3