Filters
|
| Feature Script |
| Name | Description |
|
add-accept
| Adds a 'then accept' to firewall filters that do not have one
|
|
lo0-filter
| Creates lo0 filter based on configured protocols
|
|
cs-time-based-filters
| Activates/Deactivates firewall filter terms based on configured time-ranges. |
Interfaces
|
Name
|
Description
|
|
backbone-mtu
| This commit-script checks that any interface with "CORE" or "core" in the description is configured with an MTU of 4484.
|
|
16-e1-limit
|
Limit the number of channelized e1 interfaces on a cstm1 interface
|
|
check-iso
| Enable mpls on iso-enabled interfaces
|
|
ospf-interfaces
| Ensure consistent configuration for OSPF protocol and interfaces
|
|
range
| To allow the user to issue select attributes on a range of interfaces on EX and MX |
|
vstp-check-new
| Prevent a VLAN from inadvertently being trunked and potentially causing a bridge-loop. This works with the new 9.2 style MX trunking/access configs only. |
|
params
| Turns simplified interface configuration into diverse configuration |
Logical-routers
|
Name
|
Description
|
|
max-prefix
| Move from "route limit" (deprecated) to "prefix limit" (introduced in JUNOS 8.x). |
Protocols
|
Name
|
Description
|
|
mpls-lsp
| Turn a list of addresses into a list of MPLS LSPs |
|
check-atm-interfaces
| Classifies interfaces by their vc numbers and places them into groups |
|
import-policies
| Require that import policies do contain bare 'then accept' terms |
|
check-ldp
| Enforce LDP - IGP cosistency |
|
ttl-security
| Easy mechanism to turn on TTL-based security (GTSM) |
|
drain-vrrp
| This script changes VRRP parameters if a named apply-group is also configured |
Security
|
Name
|
Description
|
|
deny-last
| Move an "any/any" reject or deny term to the last term
|
System
|
Name
|
Description
|
|
no-nukes
| Report missing configuration statements |
| protect-config
| Basic commit script to prevent typical human errors |
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
