Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Bits and Bytes Articles on Automated WAN Solutions, from Network Engineers to Network Engineers.
Browse Posts
Thanks Nikolay. I'll do some further testing as soon as both my nodes are up and running. Currently one of them is in transit to another location, so I'm not able do test at the moment. And... no worries about not answering the question. Any feedback is appreciated. ------------------------------ ...
This reminds me of the ScreenOS HA feature of yesteryear. Sure, you could route to the virtual IP address, but it took years of development before other features could use it. For a while you couldn't run OSPF on it, for example. I haven't used MNHA personally, but it appears to me it allows for greater ...
I meant check the IP config on the PC to double-check my suspicion. On Windows, for example, you can open command prompt and say ipconfig /all to check what address, gateway, and DNS the computer has configured. ------------------------------ Nikolay Semov ------------------------------
Hi Nikolay, Thank you for the assistance. After the IP of name-server is added, the PC is able to access internet. However, I would like to confirm what do you mean for You can verify this by examining the active IP configuration on the endpoint? ------------------------------ Tokumasa Sanada ...
How are you testing internet connectivity? I would say check the ARP of the internet-facing interface first to see if you're even getting anything from your default gateway. show arp no-resolve interface ge-0/0/7.0 Also, can you confirm the current configuration when you make changes, as quite ...
Hi all. This question is regarding Multinode High Availability (MNHA) setup of two Juniper SRX nodes in a hybrid deployment: It seems that you always need to have 3 IP addresses for each VLAN; one unique for each node and one virtual IP. For instance, lets say 10.10.0.0/24. If I have SRX1 and ...
Have you tried resetting to factory, then connecting via the console port, then in the cli switch to root access commands. There is a document which covers this on the web. I know it's still there and it's for srx300. I'd look for it but I forgot the keywords. Here is one. https://supportportal.juniper.net/s/article/SRX-Getting-Started-Configure-Admin-User?language=en_US ...
High-level functionality description of BIER as MVPN provider tunnels in the upcoming release of PTX Express 5. Introduction In Cheers! Have a BIER , we explained how BIER [RFC8279] works and how it has come to a prime time for BIER deployment with the hardware capabilities from several major vendors across the edge/access/core platforms. ...
What does differentiate the ACX7024X from the ACX7024 devices? In this short article, we will explain the differences and the motivation behind the creation of this new router. Introduction We launched the ACX7024 in mid-2022, with the following characteristics: 1RU Ethernet router. Built for the aggregation of SFP ...
Using Juniper vSRX on hardware with constrained resources, typically a mini-PC serving as flexible Internet gateway. Those are lately very popular due to low footprint yet with capabilities making them suitable for running virtual machines. Introduction At very minimum, a mini-PC is tool for engineers to have x86 based SRX ( vSRX ) at home ...
We’re all about connections, so make it easy for you to hop over to your favorite social channels.
Collaborate on Juniper projects with developers worldwide.
See more
Use pre-built topologies to explore our products and solutions—all for free.