MX480 3D Universal Edge Router
The MX480 3D Universal Edge Router provides a dense, highly redundant platform primarily targeted for dense dedicated access aggregation and provider edge services in medium-size and large Points of Presence (POPs).
1.92 Tbps
160 Gbps per slot
1.32 Bpps
6
6
(W x H x D) 17.5 x 14 x 23.8 in
(44.5 x 35.6 x 60.5 cm)
180 lbs / 81.65 kg
Front or center
- AC/DC (Fully loaded): -40 to -72V DC; 100-240V AC
- Maximum Power Draw: 3955 W (AC), 3592 W (DC)
32 to 104 degrees F (0 to 40 degrees C)
5 to 90 percent noncondensing humidity
No performance degradation to 13,000 ft / 4,000 m
MPCs
Modular Port Concentrators (MPCs) are a set of next-generation advanced line modules for Juniper Networks® MX Series 3D Universal Edge Routers that deliver the performance, services, and scalability that are critical to today's advanced Ethernet services edge and broadband edge networks. Designed for flexibility, MPCs introduce both the industry's highest capacity and modular 1GbE and 10GbE hardware to the MX Series portfolio. The MPC houses the packet forwarding engines that deliver up to 120 Gbps of comprehensive Layer 3 routing (IPv4 and IPv6), Layer 2 switching, inline services, and advanced hierarchical quality of service (H-QoS) per MX Series slot.
DPCs
Dense Port Concentrators (DPCs) provide multiple physical interfaces and Packet Forwarding Engines (PFE) on a single board that installs in a slot in the Juniper Networks MX Series Ethernet Services Routers. A DPC receives incoming packets from the network and sends outgoing packets to the network. The PFEs are equipped with purpose-built ASICs that perform packet processing and forwarding. Each PFE consists of one I-chip for Layer 3 processing and one Layer 2 network processor.
DPCE-X
Optimized for Ethernet switching, the DCPE-X extends JUNOS® Software to include traditional Layer 2 switching features, such as Spanning Tree, as well as more recent Ethernet standards developments including Operation, Administration, and Maintenance (OAM). The MX Series combined with the DPCE-X Layer 2 switching cards provide a wide range of MPLS and Ethernet functionality for cost-effective Layer 2 aggregation.
DPCE-R
The DPCE-R provides the same Layer 2 switching and MPLS features offered on the DPCE-X card. In addition it provides greater routing scalability (1 million routes as opposed to the DPCE-X's 32 K) and packet processing capabilities.
MX-FPC
MX-FPC modules accept up to two PICs commonly used with the M Series and T Series routers. These modules allow the MX Series to support non-Ethernet interfaces, and the PIC portability among M Series, T Series, and MX Series routers provides common sparing and investment protection.
PIC types supported:
| MX-FPC2 | MX-FPC3 |
|---|---|
| PB-1OC48-SON-B-SFP | PC-1OC192-SON-VSR |
| PB-4OC3-1OC12-SON2-SFP | PC-1OC192-SON-XFP |
| PB-4OC3-4OC12-SON-SFP | PC-4OC48-SON-SFP |
| PB-4CHOC12-STM4-IQE-SFP | |
| PB-1CHOC48-STM16-IQE-SFP |
MS-DPC
The Multiservices DPC significantly expands the flexibility of the MX Series by enabling a broad range of services and applications in a single DPC form factor that can also serve as an integral part of a security solution. Session border control (SBC) functions, intrusion detection and protection (IDP), deep packet inspection (DPI), stateful firewall, network address translation (NAT), flow monitoring, and anomaly detection can be layered simultaneously on each MS-DPC, creating a rich, scalable services plane.
ACG Research—Juniper Networks Universal Edge: Scaling for the New Network
705 KB ]
|
| Model Number | Description |
|---|---|
| MX480 Base Unit | |
| MX480BASE-DC | DC chassis |
| MX480BASE-AC | AC chassis |
| MPC | |
| MX-MPC1-3D | 1 Trio PFE, per port queueing, 64 K IFLs (logical interfaces) |
| MX-MPC2-3D | 2 Trio PFEs, per port queuing, 64 K IFLs |
| MX-MPC1-3D-Q | 1 Trio PFE, enhanced queuing, 128 KB queues (max 64 KB egress), 32 K IFLs |
| MX-MPC2-3D-Q | 2 Trio PFEs, enhanced queuing, 256 KB queues (max 128 KB egress), 64 K IFLs |
| MX-MPC2-3D-EQ | 2 Trio PFEs, enhanced queuing, 512 KB egress (or 256 KB ingress/egress), 64 K IFLs |
| MPC-3D-16XGE-SFPP | 16 port 10 GbE MPC requires small formfactor pluggable transceiver (SFP+) interfaces |
| MIC-3D-20GE-SFP | 20 ports of 10/100/1000 Ethernet with SFP interfaces |
| MIC-3D-2XGE-XFP | 2 10GbE MICs with 10-gigabit small formfactor pluggable transceiver (XFP) interfaces |
| MIC-3D-4XGE-XFP | 4 10GbE MICs with XFP interfaces |
| MIC-3D-40GE-TX | 40 ports of 10/100/1000 Ethernet with Tx interfaces |
| DPC | |
| DPCE-R-40GE-SFP | 40X1 GE L2/L3 capable |
| DPCE-R-4XGE-XFP | 4X10 GE L2/L3 capable |
| DPCE-X-40GE-SFP | 40X1 GE L2+ capable |
| DPCE-X-4XGE-XFP | 4X10 GE L2+ capable |
| DPCE-R-Q-40GE-SFP | 40x1 GE L2/L3 capable board with enhanced queuing |
| DPCE-R-Q-4XGE-XFP | 4x10 GE L2/L3 capable board with enhanced queuing |
| DPCE-X-Q-40GE-SFP | 40x1 GE L2+ capable board with enhanced queuing |
| DPCE-X-Q-4XGE-XFP | 4x10 GE L2+ capable board with enhanced queuing |
| DPCE-R-Q-20GE-SFP | 20x1 GE L2/L3 capable with enhanced queuing |
| DPCE-R-2XGE-XFP | 2x10 GE L2/L3 capable |
| DPCE-R-40GE-TX | 40x10/100/1000 Ethernet L2/L3 capable with RJ45 |
| DPCE-X-40GE-TX | 40x10/100/1000 Ethernet L2+ capable with RJ45 |
| MX-FPC2 | DPC with 2 slots for type 2 PICs |
| MX-FPC3 | DPC with 2 slots for type 3 PICs |
| MS-DPC | IP services line card for MX Series |
| Routing Engine | |
| RE-S-1300-2048-BB | 1.3 GHz CPU and 2 GB memory, Base Bundle |
| RE-S-2000-4096-UPG-BB | 2 GHz CPU and 4 GB memory, Base Bundle |
| RE-S-1300-2048-R | 1.3 GHz CPU and 2 GB memory, Redundant |
| RE-S-2000-4096-R | 2 GHz CPU and 4 GB memory, Redundant |
Routing Forum
Press Releases
Product Icons
