Operating Juniper Networks Routers - J-series
Course No: EDU-JUN-OJNR-J
Length: Three days
Cost: $1,800 (US) Register Now
Prerequisites
For prerequisite information, refer to Course Prerequisites and Recommended Reading.
Course Overview
The Operating Juniper Networks Routers - J-series (OJNR-J) course is an introductory-level, instructor-led course that focuses on installation, configuration, and operational analysis of J-series platforms. The course introduces Juniper Networks enterprise routing platforms including the M7i, M10i, and J-series models. It then focuses on J-series configuration using the new J-Web graphical user interface and also covers the JUNOS software CLI. Real-world configuration and operational monitoring case studies are provided for RIP, static, BGP, and OSPF routing, and for common services like IPSec and stateful firewall/NAT.
The course combines both lecture and labs, with significant time allocated for hands-on experience with J-series platforms and JUNOS Internet software. The three-day OJNR-J class is an excellent way to prepare students for attending other offerings in the Juniper Networks training curriculum.
Course Contents
Day 1
- Module 0: Introduction and Overview
- Module 1: Enterprise Products and J-series Overview
- Customer Edge and Enterprise Platforms
- Overview of J-series Platform
- J-series Architecture and Packet Flow
- J-series Model Specifics
- J-series Interface Support and Naming
- Field Replaceable Units
- Network Management Options
- Module 2: The J-series User Interface
- J-series User Interface Options
- User Authentication and Authorization
- Active and Candidate Configurations
- Using the J-Web Graphical User Interface
- Using the JUNOS Software Command Line Interface
- Module 3: Installation and Initial Configuration
- Installation Guidelines
- Autoinstallation
- Rescue and Factory Default Configurations
- Configuration Checklist
- Initial Configuration Using J-Web
- Initial Configuration Using the CLI
- Overview of Interface Configuration
- Configuring Interfaces Using J-Web
Day 2
- Module 4: Operational Monitoring and Maintenance
- Monitoring Platform and Interface Operation
- Network Utilities
- System Logging and Protocol Tracing
- License Management
- Maintaining JUNOS software
- File System Maintenance/Password Recovery
- Module 5: Routing Protocols and Policy
- Routing Table and Route Preferences
- Routing Policy
- J-Web Support for Routing Protocols and Policy
- Configuring and Monitoring Static Routing
- Interior Gateway Protocols
- Configuring and Monitoring RIP
- Configuring and Monitoring OSPF
- Configuring and Monitoring Basic BGP
Day 3
- Module 6: J-series Services
- Overview of J-series Services Features and Architecture
- Configuration and Monitoring of Packet Filters
- Configuration and Monitoring of Stateful Firewalls
- Configuration and Monitoring of NAT/PAT
- Configuration and Monitoring of IPSec Tunnels
- Overview of Intrusion Detection System Capabilities
- Overview of Flow Monitoring and Accounting
- Overview of J-series CoS Support
