INSTALLING Non Juniper DSMs


You can configure STRM to log and correlate events received from external sources such as security equipment (for example, firewalls), and network equipment (for example, switches and routers). Device Support Modules (DSMs) enable you to integrate STRM with these external devices. 

If you are running at least STRM 2008.3, you can install the DSM files located on this web site. 

To install a DSM: 

- Download the file to your STRM console
- Log in to STRM as root. 
- Navigate to the directory that includes the downloaded file. 
- Enter the following commands:

 tar jxvf <filename>
 
- Install individual DSM by running the command

rpm -Uvh <filename> 

- Install all DSM's by runing the command

rpm -Uvh *.rpm


- Log in to the STRM interface. 

https://<IP Address> 
Where <IP Address> is the IP address of the STRM system. 

In the main STRM interface, click Config. 

From the menu, select Configurations // Deploy configuration changes. 

For more information, please refer to the STRM DSM documentation.