INSTALLING Non Juniper DSMs


You can configure STRM to log and correlate events received from external sources such as security equipment (for example, firewalls), and network equipment (for example, switches and routers). Device Support Modules (DSMs) enable you to integrate STRM with these external devices. 

If you are running at least STRM 2008.2, you can install the DSM files located on this web site. 

To install DSM: 

- Download the file to your STRM console
- Log in to STRM as root. 
- Navigate to the directory that includes the downloaded file. 
- Enter the following commands:

  tar jxvf STRM_non_juniper_DSMupdate_090216.tar_bz2

- Change directory.
  
  cd 2008.2
 
- Install all non Juniper DSM's by running the command

  rpm -Uvh *.rpm 

- Log in to the STRM interface. 

https://<IP Address> 
Where <IP Address> is the IP address of the STRM system. 

In the main STRM interface, click Config. 

From the menu, select Configurations // Deploy configuration changes. 

For more information, please refer to the STRM DSM documentation. 




Copyright 2008,Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, NetScreen,
and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.