SRC 2.0.0 Application Library Release Notes > Release 2.0.0 > Obtaining a Default Configuration for ACP on C-series Controllers

Obtaining a Default Configuration for ACP on C-series Controllers

We recommend that you configure SRC Admission Control Plug-In (SRC-ACP) within a group. When you create a configuration group, the software creates a configuration with default values filled in.

Configuration groups allow you to share the SRC-ACP configuration with different SRC-ACP instances in the SRC network. You can also set up different configurations for different instances.

You can then create a grouped SRC-ACP configuration that is shared with some SRC-ACP instances. For example, if you create two different SRC-ACP groups called config1 and config2 within the shared SRC-ACP configuration, you could select the SRC-ACP configuration that should be associated with a particular SRC-ACP instance.

Use the shared option of the slot number acp statement to select the group for an SRC-ACP instance as part of the local configuration. Use the shared acp group name statements to configure the group.

To select and configure a group:

1. From configuration mode, select a group for an SRC-ACP instance. For example, to select a group called config1 in the path /:

[edit]

user@host# set slot 0 acp shared /config1 

2. Commit the configuration.

[edit]

user@host# commit 

commit complete.

3. From configuration mode, configure a group. For example, to configure a group called config1, specify the group as part of the SRC-ACP configuration.

[edit]

user@host# edit shared acp group config1 ? 

Possible completions:

  <[Enter]>            Execute this command

> configuration

> congestion-point-classifier

> group                Group of ACP configuration properties

  |                    Pipe through a command