Using JUNOS Routing Platforms in the SDX Network
This chapter describes how to set up the SDX software and JUNOS routing platforms so that JUNOS routing platforms can be used the SDX network. It also shows how to monitor the interactions between the SAE and JUNOS routing platforms and how to troubleshoot SDX problems on JUNOS routing platforms. The chapter contains the following sections:
- BEEP Connection Between JUNOS Routing Platforms and the SAE
- Adding JUNOS Routing Platforms and Virtual Routers
- Configuring the SAE to Manage JUNOS Routing Platforms
- Configuring Secure Connections Between the SAE and JUNOS Routing Platforms
- Checking Changes to the JUNOS Configuration
- Using SNMP to Retrieve Information from JUNOS Routing Platforms
- Developing Router Initialization Scripts
- Specifying Router Initialization Scripts on the SAE
- Accessing the Router CLI
- Configuring JUNOS Routing Platforms to Interact with the SAE
- Disabling Interactions Between the SAE and JUNOS Routing Platforms
- Monitoring Interactions Between the SAE and JUNOS Routing Platforms
- Troubleshooting SDX Problems on JUNOS Routing Platforms