[Contents] [Prev] [Next] [Index] [Report an Error]

Obtaining a License

Before you install the SDX software, contact Juniper Networks Customer Service to obtain a license. You must provide certain information so that Juniper Networks Customer Support can generate a license key, which is a critical component of the license.

Pilot License

For a pilot license, you must provide the host ID of the SAE host (or the host IDs of all hosts if you have more than one), as well as the number of concurrent users you want to have connect to the SAE.

You can determine the host ID by issuing the following command on the host:

/bin/hostid

The following alternative method is available once you have installed the SAE on the host.

  1. Create the default.properties file.
    2. /opt/UMC/ssp/etc/config -l
  2. Determine the host ID.
    3. /opt/UMC/ssp/bin/hostinfo

Both methods return the same host ID on Solaris hosts.

Production License

For a production license, you must provide the maximum number of concurrently active SAE services that you require, the period for which you need the production license, and the IP address of the license server.

[Contents] [Prev] [Next] [Index] [Report an Error]